Industrial and Production Engineering

About Department

Industrial and Production Engineering Department came into existence in the year 1980 under the umbrella of JSS Mahavidyapeetha. It became a grant-in-aid department in the year 1983. Ever since its inception, the department has grown from strength to strength over the years in terms of intake of students. The program was started in 1980. The department has an intake of over 60 students. The department has a highly qualified, dedicated faculty team. The department has very good infrastructure facilities. The department has highly sophisticated laboratories Viz. CAD/ CAM laboratory, Software Applications laboratory, Metrology laboratory, Industrial Engineering laboratory cater to carry out academic and research activities. Till date, the department has produced 10 PhDs and 9 research scholars are pursuing Ph.D. The department has been accredited three times by the National Board of Accreditation (NBA). The department has produced distinguished alumni over the years who are holding top positions in organizations and have brought laurel to the institution. The students’ placement record is excellent over the years. Students have placed in esteemed organizations Viz. Mercedes Benz, Toyota, Robert Bosch, TVS, RR Donnelley, Schneider Electric, TCS, and Accenture etc. Department is constantly encouraging students to attend internship programs in reputed companies and to participate in extracurricular activities as well. Students are also encouraged to do innovative projects by the department. Some of the projects carried out by the students like PACE have received international acclaim and won prizes to the department. The Department has been awarded with AICTE MODROB grant of Rs. 11,00,000/- for modernization of Computer Aided Design Laboratory. Under this scheme Department has procured UGS-NX suite.

Message From HOD

I&PE Department was started in the year 1980 with an intake of 40. Now the Department has an intake of 60 for B.E. Degree, intake was increased from 40 to 60 in the year 2003. Department has highly qualified faculty and experienced staff members. Ever since its inception, the department has grown from strength to strength over the years in terms of increase in placement, active participation in various forums, conferences etc. The department has given lot of emphasis on learning Advanced Manufacturing Technology to narrow the gap of industry and institute. All the department labs are well furnished with advanced instruments, devices & software.

The placement of the student is quite impressive reaching to the tune of around 70%.  10% of the students are opting for higher studies in various parts of the globe for post-graduation. Students have placed in esteemed organizations Viz. Mercedes Benz, Toyota, Robert Bosch, TVS, RR Donnelley, Schneider Electric, TCS, and Accenture etc. Department has been granted with Rs. 11,00,000/- (2019-2021) under AICTE MODROBS scheme to modernize the Computer Laboratory. Computer Aided Design/Manufacturing laboratory is now equipped with advanced version of UG-NX software which is useful for students to learn design concepts. Presently six faculty members hold PhD degree in various thrust areas of Industrial and Production Engineering domain.

The curriculum of the Department is very well balanced with courses in the core Mechanical & Production Engineering as well as Techno-management areas. Department of Industrial and Production Engineering is involved in international forum called IDEEA – International Design and Engineering Education Association, IDEEA is a non-profit organization of institutions. More than 20 universities worldwide team up to create a unique educational experience for engineering and design students. Following the long and successful tradition of PACE (Partners for the Advancement of Collaborative Engineering Education), IDEEA hosts annual forums to provide a platform for academia, students and industry to meet, exchange ideas, foster collaboration and make new friendships. Scientific presentations on cutting edge research and education build an essential part of the “IDEEA Forum”. But even more important: It is the event to showcase the outcome and process of the IDEEA Global Collaborative Project. International and interdisciplinary student teams present their product concepts – virtually and physically. They use an additional pre-conference phase to work together in labs and to meet after several months of online collaboration. Each year the Forum takes place at a different member institution. In 2019, the IDEEA Forum was held at Tec de Monterrey, Mexico.

Dr. V Ramesh

Professor and Head of Department

Email: rameshv@jssstuniv.in

Phone: 9986304191.

Vision

  • To be reputed globally by imparting quality technical education through in-depth knowledge, professional ethics and social responsibilities for the betterment of the society.
  • To create a state-of-the-art facility to promote academic, research and professional activities for teaching and student communities.
  • To provide opportunities for students to launch their career in specialized areas of research that caters for the needs of the Industry community.

Mission

  • To design the program curriculum to cater to the needs of rapid technological advancement.
  • To upgrade the infrastructure and laboratory facilities in tune with the curriculum requirements.
  • To build a close liaison with the industries for in-house theory and practical training to the teaching and student fraternities in order to enhance their skills and knowledge in the areas of Industrial Engineering, Manufacturing and Management.

  • The Department of Industrial and Production Engineering was started in the year 1980 and it received the Grant in Aid in the year 1987.
  • The Department has consistent admission of more than 80% from its inception.
  • The department has tie-ups with Industries like TVS, Mercedes Benz, Toyota, Automotive Axle etc., where our students do their internships and projects.
  • Mercedes Benz provides a Scholarship of Rs. 1, 00,000 to our female students who will clear their written exam and also it offers them internships and Jobs.
  • The Department was successful in receiving 11 lakh Rupees Grant from AICTE under the ‘Modernisation and Removal of Obsolescence in the Laboratories’ Scheme in 2019-21.
  • Faculty of our Department have successfully produced Six Ph.Ds in the last three years.
  • The Departmental faculty have chaired Conferences, delivered talks in other institutions and have been the reviewers of reputed Scopus Indexed International Journals.
  • The department faculty have mentored students to participate in International Competitions like PACE, IDEEA and ICAMES.
  • Department faculty have published research articles in reputed Journals, presented papers in conferences and authored books and book chapters.
  • Department faculty have organized various workshops and seminars to the students and FDP’s to the faculty to upgrade the skills and knowledge.
  • Department faculty has done Consultancy Projects in the area of Energy Auditing.
  • The Department has very good placement record with our students getting placed in industries like Mercedes Benz, Toyota, TITAN, Infosys, TE Connectivity, Bosch, Accenture, Cognizant, DXC, Blue Yonder etc., .
  • The students have won prizes in international competitions like PACE, IDEEA, JC Aero Design and bought laurels to our department and the institution.
  • Students have co-authored many research papers with the faculty and presented papers in the conferences.
  • I&PE students have pursued higher studies in overseas Universities like Columbia University, Brunel University, Texas A&M, Rutgers and also Indian institutions like NITK Surathkal.
  • Our students have become GM’s, CEO’s, MD’s, Directors, Vice President’s and Presidents of fortune 500 companies like Toyota, Benz, BEML, Bosch & many have become entrepreneurs

The Industrial and Production Engineering domain is broadly classified into:

Sl.

no.

Domain
1. Production and Manufacturing Management
2. Engineering Management
3. Engineering Design
4. Industrial Engineering
5. Materials Science

The faculty members of the department are working in the following thrust areas of the said domains:

  • Manufacturing Management, Lean Manufacturing & Agile Manufacturing.
  • Composite Material, Glass Reinforced Polymer
  • Manufacturing Technology and Composite Materials
  • Product Design, Manufacturing and Total Productive Maintenance.
  • Production Engineering & Manufacturing Management
  • Industrial and Organizational Psychology, Human factors Engineering.
  • Energy Management, Lean Manufacturing

Short term plan

  1. Establishing more industry linkages and having MOUs with reputed industries and research establishments.
  2. Incorporating NEP in curriculum
  3. Connecting the students to alumni network for informational interviews & other opportunities.
  4. Inviting industry personnel on regular basis to deliver talk or to have informal interactions for knowledge sharing.
  5. To offer open electives to the University students.

Long Term Plan

  1. Launching of Post-graduation M. Tech Programme

Department of I&PE has submitted a proposal to JSS Science & Technology University to start a M. Tech program with the title “Industrial & Systems Design”

  1. Training Programmes Planned
  • Faculty Development Program on ‘Design Thinking and Innovation Work Bench’
  • Student Development Program on ‘Ergonomic Analysis Using Work Pro’.
  • Training for Diploma students on CNC simulation using CADEM Software for Fanuc A System (Periodic training)
  • Training for Diploma Students on ‘Lean & Agile and Problem-Solving Techniques in Engineering Practice’ (Periodic training).

III. AICTE Project – MODROBS project execution

  • I&PE Dept. is sanctioned with Rs. 11 Lakhs under MODROBS scheme of AICTE, New Delhi. I&PE Department is imparting training to students using the UG NX latest version software for third year students which is helping the students to learn the design concepts using latest features of the software.
  • Department is planning to have advanced training program on UG-NX for faculty and students of other university under SDP/FDP theme.
  • Facility Up gradation and Maintenance
  • AICTE/DST research proposals for funding and grant.
  • Student Mentoring
  • Inclusion of more industry experts in Board of Studies & Board of Examination
  • Strengthening the Alumni Network for future collaboration
  • Department has many alumni working across the globe in their capacity as managers, directors and entrepreneurs.
  • Training programs by Alumni.
  • Collaborating for recruitment (R. R Donnelley has showed interest and has recruited the students in the past, Mr. Kiran Shankar is an alumnus of I&PE Dept.)
  • Societal Reach through training programs/sensitization programs for prospective students and parents.
# Program Educational Objectives: -The Graduates will be able to:
PEO – 1 Graduates get employed in professions related to Industrial and Production Engineering adopting and adapting to advances in technology and management.

 

PEO – 2 Graduates pursue advanced studies at Institutions of higher learning to engage in research with an inclination towards life-long learning.

 

PEO – 3 Graduates become successful professionals in a challenging environment by becoming successful entrepreneurs keeping in mind the ethical responsibilities
# Program Specific Outcomes: -The Graduates will be able to:
PSO-1 To create qualified budding, versatile and multifaceted Engineers to solve real-world problems with good theoretical and practical knowledge arising in the areas of Industrial Production Engineering.
PSO-2 To imbibe confidence in students to become entrepreneurs of the future.
PSO-3 To develop students with excellent presentation skills to take up innovative projects of industries.
# Program Outcomes :-The Graduates will be able to:
PO-1 Engineering Knowledge: Apply the knowledge of mathematics, science, engineering fundamentals, and an engineering specialization to the solution of complex engineering problems.
PO-2 Problem Analysis: Identify, formulate, research literature, and analyse complex engineering problems reaching substantiated conclusions using first principles of mathematics, natural sciences, and engineering sciences.
PO-3 Design/Development of Solutions: Design solutions for complex engineering problems and design system components or processes that meet the specified needs with appropriate consideration for the public health and safety, and the cultural, societal, and environmental considerations.
PO-4 Conduct Investigations of Complex Problems: Use research-based knowledge and research methods including design of experiments, analysis and interpretation of data, and synthesis of the information to provide valid conclusions.
PO-5 Modern Tool Usage: Create, select, and apply appropriate techniques, resources, and modern engineering and IT tools including prediction and modeling to complex engineering activities with an understanding of the limitations
PO-6 The Engineer and Society: Apply reasoning informed by the contextual knowledge to assess societal, health, safety, legal and cultural issues and the consequent responsibilities relevant to the professional engineering practice.
PO-7 Environment and Sustainability: Understand the impact of the professional engineering solutions in societal and environmental contexts, and demonstrate the knowledge of, and need for sustainable development.
PO-8 Ethics: Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice.
PO-9 Individual and Team Work: Function effectively as an individual, and as a member or leader in diverse teams, and in multidisciplinary settings.
PO-10 Communication: Communicate effectively on complex engineering activities with the engineering community and with society at large, such as, being able to comprehend and write effective reports and design documentation, make effective presentations, and give and receive clear instructions.
PO-11 Project Management and Finance: Demonstrate knowledge and understanding of the engineering and management principles and apply these to one’s own work, as a member and leader in a team, to manage projects and in multidisciplinary environments.
PO-12 Life-long Learning: Recognize the need for, and have the preparation and ability to engage in independent and life-long learning in the broadest context of technological change.

UG  

PG

Research Programmes

B.E. -NIL-

M.Sc. (by research) & Ph.D.

OBE Administration

The department Academic advisory committee comprises HOD, senior faculty, external academicians, members from industry, alumni members and student members. The committee will review the academic quality and suggest improvements in the related areas.

I&PE DEPARTMENT ADVISORY BOARD (DAB)

SL.

NO.

Name of the member Designation Role
1. Dr. V. Ramesh Professor & Head

Dept. of I&PE, SJCE, JSS S&T University, Mysuru

Chairman
2. Dr. Arun Kumar Associate Professor,

Dept. of Mechanical Engineering, (Working in I&PE Department, SJCE, JSS S&T University, Mysuru)

Internal member
3. Dr. Savitha M Associate Professor,

Dept. of I&PE, SJCE, JSS S&T University, Mysuru

Internal member
4. Dr. Dayakar G Devaru Professor,

Dept. of I&PE, SJCE, JSS S&T University, Mysuru

Internal member
5. Mr. Karibasavaraja D Assistant Professor,

Dept. of I&PE, SJCE, JSS S&T University, Mysuru

Internal member
6. Dr. Manjunatha B Assistant Professor,

Dept. of I&PE, SJCE, JSS S&T University, Mysuru

Internal member
7. Ms. Sowmya C Assistant Professor,

Dept. of I&PE, SJCE, JSS S&T University, Mysuru

Internal member
8. Dr. Skanda M G Assistant Professor,

Dept. of I&PE, SJCE, JSS S&T University, Mysuru

Internal member
9. Dr. K.M. Subbaiah Professor & Head

Dept. of I&PE, NIE, Mysuru

External member
10. Abdul Hanan khan CEO, M.K. Agrotech, Pvt. Ltd, Mysuru External member
11. Mr. Hussein Vagh Managing director

Pyramid Timbers, Mysuru

External member
12. Swathi Bhagavat Managing Director,

SPR group, Mysuru

External Member
13. Kiran Shankar President, RR Donnelley Go Creative, Newyork City, USA External Member
14. Sanjith Shetty CEO, Soham Group of Companies, Bangalore External Member

Chairperson and Supervisor of all the Committees: Dr. V. Ramesh, Professor & HOD

 

Year Class Staff Coordinator
II Mrs. Sowmya C
III Dr. Arun Kumar
IV Dr. Skanda M.G.

Module Coordinators:

Sl.

no.

Module

Coordinator

1. Production and Manufacturing Management ·         Dr. Manjunatha B
2. Engineering Management ·         Dr. V.Ramesh

·         Dr. Skanda. M.G.

3. Engineering Design ·         Dr. Arun Kumar

·         Mr. D Karibasavaraja

4. Industrial Engineering ·         Dr. Dayakar G Devaru

·         Mrs. Sowmya. C.

5. Materials Science ·         Dr. Savitha M

 

COMMITTEES

Name of the Committee Coordinating Faculty Member Activity Description
Programme Assessment committee Dr. Savitha M

 

Dr. D Arunkumar

 

Monitoring of attainment of Pos and PEO’s monitoring the faculty and student towards attending workshops and conference: taking up projects.
Internal Quality Assurance cell            Dr. V. Ramesh

 

 

For maintaining the quality standards
I&PE

PI Forum

Sports sub committee

Cultural Sub committee

Literary committee

 

Dr. Savitha M

Dr. Manjunatha B.

Mrs. Sowmya C

Dr.  Skanda M.G.

 

 

Coordinating the extra circulars activities Coordinating the sports activities

Coordinating culture activities

Coordinating the literary activities

Technical Advisory committee  

All the faculty members of the Department.

 

Organizing National seminars, Departmental lecturers, expert lectures Coordinating the technical activities of the students, Paper presentation & Competitive events
Soft skill development committee  

Dr. V.Ramesh

Dr. Savitha M

Dr. Skanda M.G.

Coordinating and organizing soft skill development programmers for the students
Department Magazine Committee Dr. Skanda M.G.

 

Complication of departments activities

(staff and students)

Collection and editing technical /General articles from the staff and students: formatting and publishing

Industrial Training & placement committee  

Dr. Dayakar G Devaru

Mr. D Karibasavaraja

Dr. Manjunatha B.

 

Coordinating and organizing the sites visits and helping the students in internship and placements related activities
Project committee Dr. D Arun Kumar

Dr. Skanda M.G.

Coordinating minor and major projects of the students
Project evaluation committee All the faculty members of the Department. Continuous evaluation of the final year student’s projects.
Seminar Evaluation committee All the faculty members of the Department. Evaluation of technical seminar by the students
Alumni committee  

Dr. Savitha M

Coordinating the alumni activities of the department.
Consultancy committee All the faculty members of the department Carrying out the consultancy work of the departments
Mentoring committee All the faculty members of the department Mentoring the students and trying to resolve three issues
Class Representatives Year wise Final Year: Mr. Vinay Kumar (2018-19)

Pre-Final Year: Ms. Benki Snehal (Nominated)

Second Year: Mr. Shreyas (Nominated)

Placement Secretaries Vaishnavi K and Rounak Shetty
SL.NO. USN NAME FACULTY ADVISOR
1 01JST19IP001 Adithi Ananth  

 

 

 

 

 

 

 

 

Dr. V Ramesh

2 01JST19IP002 Althaf T E
3 01JST19IP003 Amoghavarsha Nripatunga
4 01JST19IP005 Arundhati A
5 01JST19IP006 B B Chandan Urs
6 01JST19IP008 Chethan B
7 01JST19IP009 Chiranth K S
8 01JST19IP011 Dhanush M
9 01JST19IP012 Disha A
10 01JST19IP013 Diya M Subbaiah
11 01JST19IP015 Gayathri N
12 01JST19IP016 Goutham J
13 01JST19IP017 Gowtham H
14 01JST19IP019 Harish V Palankar
15 01JST19IP020 Harshith Venkat G
16. 01JST19IP021 Hruthik Kashyap B G  

 

 

 

Dr. D Arunkumar

17. 01JST19IP022 Jeevitha C Shekar
18. 01JST19IP024 Kunal R
19. 01JST19IP025 Mallikarjun Jangamashetti
20. 01JST19IP026 Manjunath G N
21. 01JST19IP027 Meghana R
22. 01JST19IP028 Mehek Fathima
23. 01JST19IP029 Mir Zameer
24. 01JST19IP030 Muttu Manjunath
25. 01JST19IP032 Nagashree M V
26. 01JST19IP033 Neha C A
27. 01JST19IP034 Nirgun M V
28. 01JST19IP035 Nithya D
29. 01JST19IP036 Pradyumna S Acharya
30. 01JST19IP037 Prathiksha C S
31. 01JST19IP038 Preethi S  

 

 

 

 

 

 

 

 

 

Dr. Savitha M

32. 01JST19IP039 Priyanka R
33. 01JST19IP041 Rahul R
34. 01JST19IP042 S Chandan
35. 01JST19IP043 Sai Sumukh S H
36. 01JST19IP046 Sohan Kumar S K
37. 01JST19IP047 Sudeep Y
38. 01JST19IP048 Suhas P
39. 01JST19IP049 Sumanth P
40. 01JST19IP050 Thushara V
41. 01JST19IP051 Vidisha H V
42. 01JST20IP400 ABHISHEK GOWDA K
43. 01JST20IP401 AKHILESH GOWDA Y S
44. 01JST20IP402 B M ANOOP
45. 01JST20IP403 CHANDAN RAGHAVENDRA S
46. 01JST20IP404 CHIRAG  

 

 

 

Dr. Dayakar G Devaru

47. 01JST20IP405 DEEPAK A
48. 01JST20IP406 DEEPAK V
49. 01JST20IP407  DHANUSH G M
50. 01JST20IP408 GAGAN D
51. 01JST20IP409 HARSHA A S
52. 01JST20IP410 HARSHITH RAJU
53. 01JST20IP411 MANJUNATHA U
54. 01JST20IP412 MUHAIMEEM KHAN
55. 01JST20IP413 NANDAN KUMAR J K
56. 01JST20IP414 NIRUP A
57. 01JST20IP415 PRAVEEN KUMAR K
58. 01JST20IP416 RAVI KUMAR R
59. 01JST20IP417 SHASHANK N S
60. 01JST20IP418 VINEETH R
61. 01JST20IP419 YASHAS P
62. 01JST18IP001 AISHWARYA M V  

 

 

 

 

 

 

 

 

Mr. Karibasavaraja

63. 01JST18IP002 AISHWARYA R
64. 01JST18IP003 AISIRI D
65. 01JST18IP004 AJAY P N
66. 01JST18IP005 AMEENA MERAJ
67. 01JST18IP006 APOORVA P
68. 01JST18IP008 ASHWITHA M
69. 01JST18IP009 BHOOMIKA R POOJARI
70. 01JST18IP012 CHANDA C M
71. 01JST18IP013 DEVARAJU B M
72. 01JST18IP014 G BHARGAVI
73. 01JST18IP015 GANESH I H
74. 01JST18IP016 GAURAV S
75. 01JST18IP017 HAMSAVENI A  

 

 

 

 

 

 

Dr. Manjunatha B

76. 01JST18IP018 HARISH KUMAR
77. 01JST18IP019 HARSHAD T H
78. 01JST18IP020 HEMANTH K M
79. 01JST18IP021 HITHIN N
80. 01JST18IP022 JAYAPRIYA K B
81. 01JST18IP026 M B KRUTHI
82. 01JST18IP027 MADHAV KAUSHIK
83. 01JST18IP028 MAMATHA J
84. 01JST18IP029 MARIAM ZAKIR AHMED
85. 01JST18IP031 NAMITH JAIN J
86. 01JST18IP034 NAYANA P
87. 01JST18IP035 NIKIL NACHAPPA M U
88. 01JST18IP036 NOYONIKA M R  

 

 

 

 

 

 

 

 

 

Mrs. Sowmya C

89. 01JST18IP037 PADMASHREE KARNAM
90. 01JST18IP039 PRADYUMNA S BHARADWAJ
91. 01JST18IP040 RAKSHITHA N
92. 01JST18IP041 RAVIKUMAR M
93. 01JST18IP043 SAMEEKSHA A V
94. 01JST18IP044 SAMIKSHA S URS
95. 01JST18IP045 SHREYAS ARADHYA A C
96. 01JST18IP046 SPANDANA N
97. 01JST18IP047 SPARSHA Y
98. 01JST18IP049 SRIVATSA KRISHNA MUGALI
99. 01JST18IP050 SUMUKH S
100. 01JST18IP051 SURYAPRAKASH G
101. 01JST18IP052 SUSHMITHA S  

 

 

 

 

 

 

 

 

Dr. Skanda M G

102. 01JST18IP053 TEJASWINI M
103. 01JST18IP054 V KRISHNAKANTH KEMPAIAH
104. 01JST18IP055 VIDYASHREE C M
105. 01JST18IP056 VINEETHKUMAR A
106. 01JST18IP401 AKSHAY N SHETTY
107. 01JST18IP405 MADHU HN
108. 01JST19IP400 DILIP P
109. 01JST19IP401 HEMANTH U R
110. 01JST19IP402 NITHYANANDA T
111. 01JST19IP403 SUDHARSHAN R
112. 01JST19IP404 SUFIYAN AHMED

Details of Lab facilities

Name of the Laboratory Name of the Major Equipment
Metrology & Measurements ·         Profile Projector

·         Talyrond

·         Autocollimator

·         Tool Makers Microscope

·         Dial Micrometer

·         Optical Flats

·         Levelling Press

·         Gear Tooth Micrometer

·         Spline Micrometer

·         Deep Hole Dial Depth Gauge

·         Dial Micrometer

·         V-Anvil Micrometer

·         Magnetic Check Profile Projector Vernier Calipers

·         Dial Calipers

·         Digital Calipers

Industrial Engineering Laboratory ·         Modern Tread Mill

·         Ergometer

·         Workstudy Professional software.

CAD/CAM/CAE ·         UGS NX Bundle – 75 Seat License

·         Solid Edge Student version

·         ANSYS 10 Student Edition

·         CNC EXSL Simulation software – 10 Seat License

·         CADEM – 15 Seat License

Software Applications / Operations Research Laboratory ·         TORA –Operations Research free Software

·         WinQSB (Windows Quantitative Systems for Business) – Free Software

Centralized Laboratories/Workshops
·         Basic Materials Testing Laboratory

·         Workshop

·         Machine Shop,

·         Mechanical Lab

 

Classroom

Department has spacious classrooms with adequate seating capacity with proper acoustics. In addition, the Department of I&PE is having a smart board at IP005 Seminar Hall to teach students using visual aids.

Know your Faculty

Sl. No. Name Designation Research Area Email (University Email)
1. Dr. V. Ramesh Professor & HOD Manufacturing Management, Lean and Agile Manufacturing. rameshv@jssstuniv.in
2. Dr. D Arunkumar Associate Professor (Department of Mechanical Engineering, deputed to I&PE Department) Machine Design, Lean and Agile Manufacturing. arunkumar@jssstuniv.in
3. Dr. Savitha M Associate Professor Composite Materials, Smart Materials. savitham@jssstuniv.in
4. Dr. Dayakar G Devaru Professor Energy Engineering, Lean Manufacturing, Operations Research dayakar.devaru@jssstuniv.in
5. Mr. D Karibasavaraja Assistant Professor Fracture Mechanics karibasavaraja@jssstuniv.in
6. Dr. Manjunatha. B Assistant Professor Product Design and Manufacturing, TPM manjub@jssstuniv.in
7. Mrs. Sowmya. C Assistant Professor Production Engineering, Lean Manufacturing and TRIZ sowmyac@jssstuniv.in
8. Dr. Skanda M. G Assistant Professor Engineering Management, Human Factors Engineering. skanda.rao@jssstuniv.in
NAME QUALIFICATION DESIGNATION CONTACT DETAILS
 

 

 

MAHADEVASWAMY M

 

 

DIPLOMA IN MECHANICAL ENGG.(MTT)

 

 

 

INSTRUCTOR

 

 

 

+91 9886730709

 

 

 

SHANKARAIAH

 

 

S.S.L.C. ITI -FITTER

 

 

ASST. INSTRUCTOR

 

 

 

+91 9632547705

 

 

 

NAGESH G.S.

 

 

S.S.L.C. ITI-TURNER

 

 

 

HELPER

 

 

 

+91 8971782947

 

 

 

CHANDRASHEKARA S R

 

 

 

P.U.C., (BA.,)

 

 

 

HELPER

 

 

 

+91 8152025057

 

 

 

ABHIJITH

 

 

ITI – FITTER DIPLOMA IN MECHANICAL

 

 

 

HELPER

 

 

 

+91 7483775532

Technical Programs Organized

 

Sl.

No.

Name of the Invited Speaker  

Title/Summary of the Lecture delivered

 Speaker Details Date
 

1.

Mr VIJAY KUMAR The Industrial Applications of the concepts learnt in college and gave the insight to build the gap between industry and

Academy.

VIJAY KUMAR, MD, TVS MYSURU Plant 05th April 2018
 

 

2.

Mr. Balawat Understanding of the properties and applications of various materials and how these materials are being used in day to day life in different engineering applications. Mr. Balawat, Consultant, Mysuru 16 Feb 2019
 

3.

Mr. S Badri Narayana ‘Value 1.0 leading

to Industry 4.0

Mr. S Badri Narayana Taoknoware, CEO B’LORE 16.2.2019
 

4.

Mr. M.S

Chandrashekar.

Advances in Manufacturing Technology’ Mr. M.S Chandrashekar

KPTCL, CHIKKAMANGALURU

23.2.2019
 

5.

Mr. Dinesh Kumar D.K “Awareness Program on Renewable Energy” Mr. Dinesh Kumar D.K Project Engineer, KREDL

Mysuru

16th August 2019
 

6.

Dr. Hanumanthachar  Joshi “Management of memory and concentration – challenges and Dr. Hanumanthachar Joshi, Professor and Head, Sarada Vilas College of Pharmacy, Mysore 17th September 2019
opportunities”
 

7.

Mr. Vedamurthy

Dr. Shirish Kala

Mr. Atul Phadke Mr. Sandeep Singh Mr. Mahesh V Ayer

Dr. Deepak Gupta

Expert Lecture Series (Webinars); ‘Essential Skills to become an Industrial Engineer’ Ingersoll Rand (India) Limited, Ahmedabad

Clark FIxture Technologoies India Pvt Ltd, Mysuru Eaton, Pune

Hewlett Packard Enterprise, Bengaluru

NCR Corporation, Chennai

27July 2020 – 1 Aug

2020 and 8 Aug 2020

Wichita State University, USA

Research Initiatives

 Sl.

No.

 Name  Area of Specialization
1 Dr. V. Ramesh Manufacturing Management, Lean and Agile Manufacturing
2 Dr. Dayakar G. Devaru Energy Engineering, Lean Manufacturing, Operations Research
3 Dr. D. Arunkumar (Mechanical Engineering Department, Deputed to I&PE Department) Machine Design, Lean and Agile Manufacturing
4 Dr. M. Savitha Composite Materials, Smart Materials.
5 Dr. Manjunatha B Product Design and Manufacturing, TPM
6 Dr. Skanda M G Engineering Management, Human Factors Engineering.
Guide Research Scholar

(Full/Part Time)

Research Topic Registration Year Status
 Dr. V Ramesh Mrs. C Sowmya (Part Time)  “Lean and Inventive Problem Solving Techniques for the Sustainable Model in Shop Floors of Medium Scale industries” 2017  Pursuing
Dr. Dayakar G Devaru Mr. Pratheek Poovaiah (Part time) “Assessing and Improving Energy Efficiency and Productivity of a Two-Wheeler Manufacturing Plant” 2020 Pursuing
Dr. Savitha M

 

 

 

 

Dr. Manjunatha B

Mrs. Bhavya V

 

 

 

1. Mr. Praveen Kumar U B (Part time)

 

 

“Development of Graphite Reinforcement in Nylon 66 for Dry Lubricant Application”

 

“Structural Evaluations, Mechanical Testing and Characterization of Inconel Super Alloy used in Aero Engine Disks”

2021

 

 

 

 

2021

Pursuing

 

 

 

 

Pursuing

 

 

2. Mr. Kousik S (Part time) “Optimization of Flow Shop Scheduling Problem Using Setup Times” 2021 Pursuing
  • Department is having an industry linkage with many industries like Mercedes Benz, TVS motors etc. Students have undergone training and done their internships for many industrial projects,
  • Faculty members and Students have visited many industries as a part of Industrial visits to many reputed institutions & organizations like ISRO, IISc, BOSCH, TVS, Toyota, West Coast Paper mills etc.
  • Students of the department have done their internships in many reputed companies.
SL.NO USN NAME OF THE STUDENT YEAR OF PASSING OUT INTERNSHIP
1 4JC15IP001 ADITHYA C S 2019 GOKULDAS
4 4JC15IP006 ANJANA S KUMAR MERCEDES MIM
6 4JC15IP017 HIMANI S PORWAL MERCEDES MIM
7 4JC15IP019 JAYASHREE H R MERCEDES MIM
14 4JC15IP038 PRERANA. P MERCEDES MIM
15 4JC15IP039 RAKSHA SHESH MERCEDES MIM
17 4JC15IP044 SANJANA J GOKULDAS
19 4JC15IP050 SONAL PAL GOKULDAS
20 4JC15IP052 SPANDANA S GOKULDAS
21 4JC15IP056 SUSHMITHA SURAJ MERCEDES MIM
22 4JC15IP059 THANUSHREE H P MERCEDES MIM
25 4JC16IP402 CHANDRAKANTH U GOKULDAS
1 01JST16IP003 Abinaya R 2020 Mdrdi
2 01JST16IP004 Achal B Hebbar lam research
11 01JST16IP042 Shreya S lam research
2 01JST17IP003 Benki Snehal Benz Mim
3 01JST17IP005 Chandan Kumar K Cognizant
4 01JST17IP007 Chethan Raj PN Cognizant
5 01JST17IP012 G Vishok Cognizant
7 01JST17IP016 KARTHIK S Cognizant
8 01JST17IP033 Prajwal S Cognizant
12 01JST17IP044 S K CHANDANA Benz Mim
15 01JST17IP053 Suraj R Cognizant
16 01JST17IP055 Vaishnavi k Cognizant
17 01JST17IP056 Venkatesh Heggade S R Cognizant

Funded Project Details:

Modernization of Computer Lab

Project Title Funding Agency Amount Duration Status
Modernization of Computer Lab

 

AICTE-MODROBS Rs. 11,00,000/- 3 Years (2019-2022) Active
Sl.No. Work Title Investigators Client Details Amount Duration Action
1. Energy Audit of JSS College for Women, Kollegal Dr. Dayakar G Devaru

Dr. Mohan N

Mr. Ravishankar B S

JSS College for Women, Kollegal Rs. 16,000/- 11.12.2021 to 29.12.2021 Completed
2. Energy Audit of JSS College for Women, Saraswathipuram, Mysuru. Dr. Dayakar G Devaru

Dr. Mohan N

Mr. Ravishankar B S

JSS College for Women, Saraswathipuram, Mysuru. Rs. 15,000/- 29.11.2021 to 22.12.2021 Completed

Interdisciplinary/multidisciplinary collaboration is a key for success in the research. The department has national and international collaborations from academic and research institutions.

Sl. no Title of the Paper Authors Journal Name with ISSN Number Journal Details
1 “The Impact of Digitalization on the Bank Competitiveness” Dr. Skanda M G, collaborated with Vladislav Rutskiy et.al

Siberian Federal University Krasnoyarsk, Russia

 

 

 

Proceedings of the Computational Methods in Systems and Software

Data Science and Intelligent Systems, https://link.springer.com/chapter/10.1007/978-3-030-90321-3_73#citeas
Particulars 2020-21 2019-20 2018-19
No of students 53 57 61
No of students placed 19 17 25
Higher studies 2 3 7
No. of students turned entrepreneur in engineering/technology

 

1 2 2

—-Update soon—–

Sl. No. Distinguished Alumni with their achievements and present status.
1. Mr. Sharath Mano, Lieutenant, Indian Army
2. Mr. Kiran Raj Bhatt, Officer, Indian Navy.
3 Mr. Kiran Shankar, MD South Asia Head, RR Donnelley Pvt. Ltd.
4 Mr. Pavan Ranga, CEO Rangsons Electronics, Mysore
5 Mr. Sanjeeth Shetty, CEO Shoham Group of Companies, Bangalore
6 Mr. Abdul Hanan Khan, CEO and Managing Director, M.K. Agrotech (Sunpure Oil).
7 Mr. Hussein Vagh, CEO, Pyramid Timbers.
8 Mr. Vasudeva, MD, Robert Bosch, Bangalore.
9 Mr. Subramanyam, MD, Shimoga Steels
10 Ajith Pai, MD, Vijaya Wires and Filaments.
11. Mrs. Swathi Bhagawath, Managing Director, SPR group of Hotels.
12. Mr. Ratheesh and Anand, CEO, VIVRT Motors.
13. Mr. Abhishek Dambal, CEO, YAANA Pvt. Ltd.

Faculty members and research scholars undertake research work along with their regular teaching workload. Faculty members have published around 40+ publications in Journals and conferences between the years 2017 to date.

 

Publication Details

Journal Publication 2021

Sl No. Publication
1 Dr. Dayakar G Devaru, Bhaskaran Gopalakrishnan, “Regression Model to Estimate Electrical Energy Consumption of Lumber Sawing based on product, process and system parameters”, Energy Efficiency Journal, October 2020 13(8), 1799-1824, Springer Publications. (Scopus Indexed Journal)
2 Dr. Skanda M G, Dr. V Ramesh, Dr. D Arunkumar, “Importance of Error Management in Occupational Safety: A Case Survey Conducted in Manufacturing Set-ups”, Design Engineering, 13190-13200, Vol 2021, Issue 08
3 Dr. Manjunatha B, Dr. Neetha K, A S Bindhu, “Optimization of a Plant Layout for the Forklift Movement for a Coffee Plant”, Journal of PSYCHOLOGY AND EDUCATION (2021) 58(5), ISSN 1553 – 6939

 

  • Conference Publication 2021

 

Sl No. Publication
1 Vinutha P, Divakar H N, Subbaiah K M and Savitha M, “Preparation and Characterization of temperature regulating silk cocoon extract (SERICIN)/PVA based smart fabric” International conference on Trends in Mechanical Sciences (ICTMES 2020) 06 – 07 August 2020, Malnad College of Engineering, Hassan, India
2 Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Dr. Ashok B C, “Lean Implementation and Assessment within Four Indian SME’s-A Case Studies Approach”, International Conference on Futuristic Trends in Mechanical Engineering, 2020
3 D Kari Basavaraja, C Sowmya, and Ravindra Naik, “Experimental analysis of Fracture Toughness of EN9 and EN31 Steel under double layer of electroplating materials with different varied thickness”, IOP Conference Series: Materials Science and Engineering, Volume 1065, 1st International Conference on Frontiers in Engineering Science and Technology (ICFEST 2020) December 18th-19th 2020, Mangalore, India
BOOKS/BOOK Chapters
Chapter 5, “Evaluating the Influence of Energy Consumption on Process Plan Attributes: Process Plans Indexing Based on Electrical Demand and Energy Consumption” Omar AlShebeeb, Bhaskaran Gopalakrishnan, Dayakar Devaru, Handbook of Research on Advancements in Manufacturing, Materials, and Mechanical Engineering, IGI Global Publications, September 2020
Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Dr. Ashok B C, “Lean Implementation and Assessment within Four Indian SME’s-A Case Studies Approach”, Part of the Lecture Notes in Mechanical Engineering book series (LNME), August 2021,
Dr. Skanda M G, and Dr. V Ramesh, written a book being published by VTU Prasaranga, Belagavi in Kannada on “Lean Manufacturing”. Book draft is accepted by VTU, Belagavi and it is in the process of publication
  2017-18 2018-19 2019-2020
Number of Research papers in refereed journals 04 10 13
Number of Conference papers. 05 20 08
Number of Books with publisher details. NIL NIL 01

 

 

Publications 2017-18

Conferences:

  1. T.R.Srinivas and Manjunatha B. (2017). Implementation of total productive maintenance (TPM) to increase overall equipment efficiency of an hotel industry , International Conference on Research in Mechanical Engineering Sciences RiMES-2017 organized by Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal University during 21st – 23rd December 2017.
  1. Manjunatha B, Dr. T R Srinivas, Presented a Paper on “Method Study on laboratory Reagents consumption in Tertiary Healthcare firms to increase productivity ”, International Conference on Mechanical, Manufacturing, Industrial & Civil Engineering(ICMMICE) organized by Advanced research society for science and sociology association with ISSRD, Bengaluru, on 29th April 2018.
  1. T.R.Srinivas and Prashanth Pai M. (2017). Reliability Assessment and Study of Quality Control Tools on Intermixer and Dump Mill of a Tyre Manufacturing Industry , International Conference on Research in Mechanical Engineering Sciences RiMES-2017 organized by Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal University during 21st – 23rd December 2017
  2. T.R.Srinivas and Rishi J P. (2017). A Study on Lean Manufacturing Practice Carried Out for Axle Housing Plant , International Conference on Research in Mechanical Engineering Sciences RiMES-2017 organized by Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal University during 21st – 23rd December 2017.
  3. Skanda M.G., Dr. V. Ramesh, “Study on Human Error Management Culture in Medium and Small Scale Manufacturing Setups of Mysore city in India”, 8th International Conference on Applied Human Factors and Ergonomics (AHFE 2017) held in Los Angeles. USA from 7.2017 to 21.7.2017.
  4. Skanda M G, Dr V Ramesh. (2017). Industrial accidents and Individual Differences: A Review on Personality Traits and Accident Proneness in Manufacturing Sectors , Proceedings of the International Conference on Recent Engineering and Technology 2018, 05th May 2018, Bangalore, India organized by Organization of Science and Innovative Engineering & Technology.

Journals

  1. Sowmya C, Dr V Ramesh, Karibasavaraja D. (2017). An Experimental Investigation of New Hybrid Composite Material using Hemp and Jute Fibres and Its Mechanical Properties through Finite Element Method , Materials Today Proceedings 5 (2018) 13309-13320, published by Elsevier Science Direct.
  2. Manjunatha B Dr. T.R Srinivas and Neetha K, “Method Study on laboratory Reagents consumption in Tertiary Healthcare firms to increase productivity ”, International Journal of Mechanical and Production Engineering (IJMPE), Volume-6,Issue-6,pp 62-66 ,2018. ISSN(p): 2320-2092, ISSN(e): 2321-2071http://www.iraj.in/journal/journal_file/journal_pdf/2-476-153396666862-66.pdf
  3. Sowmya, Karibasavaraja D, Dr. V Ramesh and Skanda M.G titled “the Effects of Electroless Nickel Phosphorus Deposition, pH and Temperature with the Varying Coating Bath Parameters on Impact Energy by Taguchi Method” International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering (WASET) Vol:11, No:4, 2017.
  4. Raghu S, M, Nanjundaswamy H M, Dr Savitha M, Sreenivasa M. (2017). Synthesis and Characterization of Mechanical properties of Nano TiO2 particulate reinforced Al-MMC International Journal of Mechanical and Production Engineering Research and Development – IJMPERD.

Publications 2018-19

Conferences

  1. T. R Srinivas and Rishi J P. (2018). presented a Paper titled Implementing the Lean Framework in a Small & Medium & Enterprise (SME) – A Case Study In a Printing Press ’’ in International Conference on advances in Manufacturing Materials & Energy Engineering IConMMEE2018) conducted at MITE, Moodbidri Karnataka India, from 2nd & 3rd March 2018.  Paper presented is now published in IOP conference series. It’s an open access Scopus indexed conference proceedings.
  1. Prashanth Pai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J. (2018). Reliability Assessment and Study of Quality Control Tools on Intermixer and Dump Mill of a Tyre Manufacturing Industry, MATEC Web of Conferences 144, 05001 (2018), https://doi.org/10.1051/matecconf/201814405001.
  1. Dayakar G. Devaru, Mr. Abhinandan H H, “Indian Sugar Industries Profile, Problems and Energy Efficiency Solutions”. Paper No. 174, International Conference on Innovations in Engineering, Technology and Sciences, NIEIT, Mysuru, Sept. 2018
  2. Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Abhishek, Implementation of Lean Strategies and Total Productive Maintenance (TPM) in A Wheel and Axle Plant, IEEE 4th International Symposium on Robotics and Manufacturing Automation-IEEE ROMA 2018 organized by IEEE Robotics & Automation Society-Malaysia Chapter, Dhanalakshmi Srinvasan Engineering College, Perambalur, Tamilnadu, India, UCSI University Malaysia, Monash University Malaysia, Universiti teknologi Petronas Malaysia during 10 – 12 December 2018
  3. PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, A Quantitative Approach to Identify the Contributing Factors for the Non-usage of TPM in Selected SMEs, IEEE 4th International Symposium on Robotics and Manufacturing Automation-IEEE ROMA 2018 organized by IEEE Robotics & Automation Society-Malaysia Chapter, Dhanalakshmi Srinvasan Engineering College, Perambalur, Tamilnadu, India, UCSI University Malaysia, Monash University Malaysia, Universiti teknologi Petronas Malaysia during 10 – 12 December 2018
  4. Rangavendra M J, Dr. Ramachandra C G, Dr. Srinivas T R & PrashanthPai M, Fabrication of EDM Electrode by Laser Sintering Method for SS316L Material, IEEE 4th International Symposium on Robotics and Manufacturing Automation-IEEE ROMA 2018 organized by IEEE Robotics & Automation Society-Malaysia Chapter, Dhanalakshmi Srinvasan Engineering College, Perambalur, Tamilnadu, India, UCSI University Malaysia, Monash University Malaysia, Universiti teknologi Petronas Malaysia during 10 – 12 December 2018
  5. PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, Influence of cutting speed on cutting force, Tool flank wear in Turning of Ti-6Al-4V alloy, International Convention on Innovative Scientific Research Strategies (ICISR2018) in Science, Engineering, Business Management Applications & Medical Technology, Organized by Innovative Scientific Research Professional Malaysia In Association with Faculty of Electrical Engineering University Technology MARA-Shah Alam, Malaysia during 17-21 October 2018
  6. Ramachandra C G, Neetha K, Dr. Srinivas T R, Increase of Overall Equipment Efficiency of a CT scan equipment using Total Productive Maintenance Techniques, International Convention on Innovative Scientific Research Strategies (ICISR2018) in Science, Engineering, Business Management Applications & Medical Technology, Organized by Innovative Scientific Research Professional Malaysia In Association with Faculty of Electrical Engineering University Technology MARA-Shah Alam, Malaysia during 17-21 October 2018
  7. Rishi J P, Dr. Srinivas T R & Dr. Ramachandra C G, Challenges and Success Factors for Implementation of Lean Manufacturing in Indian SMEs, International Convention on Innovative Scientific Research Strategies (ICISR2018) in Science, Engineering, Business Management Applications & Medical Technology, Organized by Innovative Scientific Research Professional Malaysia In Association with Faculty of Electrical Engineering University Technology MARA-Shah Alam, Malaysia during 17-21 October 2018
  8. PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, A Survey Approach to Study the Factors Affecting Usage of TPM in Non-Manufacturing Industries, International Convention on Innovative Scientific Research Strategies (ICISR2018) in Science, Engineering, Business Management Applications & Medical Technology, Organized by Innovative Scientific Research Professional Malaysia In Association with Faculty of Electrical Engineering University Technology MARA-Shah Alam, Malaysia during 17-21 October 2018.
  9. Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Abhishek, Lean Manufacturing to Green Manufacturing: Practices and its Implementation in SME’s, International Conference on Green Trends in Mechanical Engineering Sciences GTMES-2018 A twinning program organized by Malnad College of Engineering, Hassan, Karnataka & Johrat Engineering College, Johrat, Assam, India, during October 3-5, 2018
  10. Rangavendra M J, Dr. Ramachandra C G, Dr. Srinivas T R & PrashanthPai M, Experimental Analysis Of Cutting Parameters On Tool Wear And Workpiece Surface Temperature In Turning Of Ti-6al-4v (Titanium Grade -5) Alloy, International Conference Advanced Ceramics and Nanomaterials for Sustainable Development, ACEND -2018 organized by Christ University, Bengaluru during 19th – 21st September 2018.
  11. Manjunath B, T R Srinivas & Dr. Ramachandra C G, Reduction of CO2 emission in a Hotel Industry by using Total Productive Maintenance (TPM) Tools, International Conference & Pre-Conference Workshop on Emerging Trends in Mechanical Engineering e-Time 2018 organized by St Joseph’s Engineering College, Mangaluru during 10th – 11th August 2018
  12. PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, A Survey on Factors Affecting Total Productive Maintenance (TPM) in Service Industries, International Conference & Pre-Conference Workshop on Emerging Trends in Mechanical Engineering e-Time 2018 organized by St Joseph’s Engineering College, Mangaluru during 10th – 11th August 2018.
  13. PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, A Survey on TPM Usage and Factors Affecting Its Implementation in Selected Industries, International Conference on Knowledge Collaboration in Engineering ICKCE -2018 organized by Kathir College of Engineering, Coimbatore during 24th – 25th March 2018.
  14. Ramachandra C G, Dr T R Srinivas, PrashanthPai M & Rangavendra M J, Condition Monitoring of Batch Off Mill in a Tyre Manufacturing Industry, International Conference on Knowledge Collaboration in Engineering ICKCE -2018 organized by Kathir College of Engineering, Coimbatore during 24th – 25th March 2018.
  15. Rangavendra M J, Dr. Ramachandra C G, Dr. Srinivas T R & PrashanthPai M, Comparative Study on Temperature Measurement of a Coated and Uncoated Tool Insert in Turing Process by using Tool Work Thermocouple, International Conference on Knowledge Collaboration in Engineering ICKCE -2018 organized by Kathir College of Engineering, Coimbatore during 24th – 25th March 2018
  16. Rangavendra M J, Dr. Ramachandra C G, Dr. Srinivas T R & PrashanthPai M, Optimization of Surface Roughness in Turning Operation in Machining of TI-6AL-4V (Titanium Grade -5), International Conference on Advances in Manufacturing, Materials & Energy Engineering Icon MMEE-2018 organized by Department of Mechanical Engineering, Mangalore Institute of Technology &Engineering, Moodbidri, March 2-3, 2018.
  17. Rishi J P, Dr. Srinivas T R, Dr.Ramachandra C G & Dr.B C Ashok, Implementing the Lean Framework in a Small Medium Enterprise (SME)-A Case Study in Printing Press, International Conference on Advances in Manufacturing, Materials & Energy Engineering Icon MMEE-2018 organized by Department of Mechanical Engineering, Mangalore Institute of Technology &Engineering, Moodbidri, March 2-3, 2018.
  18. PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, A Study on Usage of Total Productive Maintenance in Selected SMEs, International Conference on Advances in Manufacturing, Materials & Energy Engineering Icon MMEE-2018 organized by Department of Mechanical Engineering, Mangalore Institute of Technology &Engineering, Moodbidri, March 2-3, 2018.

 

 

Journals

  1. Skanda M.G. and Dr. V. Ramesh. (2018). Published a paper titled Industrial Accidents and Individual Differences: A Review on Personality Traits and Accident Proneness in Manufacturing Sectors  published in Journal of Advanced Research in Dynamical & Control Systems, Vol. 10, 05-Special Issue, 2018
  2. Karibasavaraja D, Sowmya C. & Dr. Ramesh V. (2018). Published in Elsevier Science Direct indexed paper titled An Experimental Investigation of New Hybrid Composite Material using Hemp and Jute

Fibres and Its Mechanical Properties through Finite Element Method in Material today Proceedings 5(2018) 13309–13320

  1. Raghavendra M J, Dr. Ramachandra C G, T R Srinivas & Prashanth Pai M. (2018). Optimization of Surface Roughness in Turning Operation in Machining of Ti-6al-4v (Titanium Grade -5), IOP Conf. Series: Materials Science and Engineering 376 (2018) 012128 doi:10.1088/1757-899X/376/1/012128, IOP Publishing-2018.
  2. PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, A Study on Usage of Total Productive Maintenance (TPM) in Selected SMEs, IOP Conf. Series: Materials Science and Engineering 376 (2018) 012117 doi:10.1088/1757-899X/376/1/012117, IOP Publishing-2018.
  3. Raghavendra M J, Dr.Ramachandra C G, T R Srinivas & Prashanth Pai M, Optimization of Surface Roughness in Turning Operation in Machining of Ti-6al-4v (Titanium Grade -5), IOP Conf. Series: Materials Science and Engineering 376 (2018) 012128 doi:10.1088/1757-899X/376/1/012128, IOP Publishing-2018.
  4. Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Dr. Ashok B C, Implementing the Lean Framework In ASmall & Medium & Enterprise (SME) – A Case Study In Printing Press, IOP Conf. Series: Materials Science and Engineering 376 (2018) 012126 doi:10.1088/1757-899X/376/1/012126, IOP Publishing-2018.
  5. PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, Reliability Assessment and Study of Quality Control Tools on Intermixer and Dump Mill of a Tyre Manufacturing Industry, MATEC Web of Conferences 144, 05001 (2018), https://doi.org/10.1051/matecconf/201814405001.
  6. Manjunath B, T R Srinivas & Dr. Ramachandra C G, Implementation of total productive maintenance (TPM) to increase overall equipment efficiency of an hotel industry, RiMES-2017, MATEC Web of Conferences 144, 05004 (2018), https://doi.org/10.1051/matecconf/201814405004.
  7. Rishi J P, Abhishek, Dr. Srinivas T R & Dr.Ramachandra C G, A Study on Lean Manufacturing Practice Carried Out for Axle Housing Plant, MATEC Web of Conferences 144, 05005 (2018), https://doi.org/10.1051/matecconf/201814405005.

Publication Details: 2019-20

Conference

  1. Sowmya, V.Ramesh, Vijaya Kumar P titled “Man Power Reduction in Moulding Operations through SWCT study technique” communicated in 2nd International Conference on Advances in Mechanical Engineering Sciences ICAMES – 2K20.
  2. Extraction of Water from Air Using Renewable Energy,

Dr. Dayakar G. Devaru, Mr. Ravishankar M.D, Dr. Rathnakar G

National Conference on Research Advances in Engineering & Technology, CSI Engineering College, Ketti Valley, Ooty 2019.

  1. PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R, Ramesha S & Rangavendra M J, Overall Equipment Effectiveness of a Mechanical Press in a Manufacturing Unit – A Case Study, Global Conference on Advanced Smart & Sustainable Technologies in Engineering (GCASSTE-2020), organized by Department of Mechanical Engineering, Mangalore Institute of Technology & Engineering, Moodbidri, Karnataka, during 30-31 January 2020.
  2. PrashanthPai M, Dr. Ramachandra C G, Dr. Srinivas T R & Rangavendra M J, A Survey Approach to Study the Influence of Management Factor in Implementing TPM in Selected SMEs, International Conference Emerging Trends in Mechanical Engineering (eTIME 2019), organized by St. Joseph Engineering College, Vamanjoor, Mangaluru, Karnataka, during 9-10 August 2019.
  3. Rangavendra M J, Dr. Ramachandra C G, Dr. Srinivas T R & PrashanthPai M, Influence of Machining cutting speed on cutting force, Tool flank wear on PVD inserts by Turning of Ti-6Al-4V alloy, 2nd International Conference Emerging Research in Civil Aeronautical and Mechanical Engineering(ERCAM-2019), organized by Nitte Meenakshi Institute of Technology, Bengaluru, during 25-26 July 2019.
  4. Raghavendra M J, Dr.Ramachandra C G, T R Srinivas & Prashanth Pai M, Optimization of surface roughness of Titanium Gr-9Alloy Turning using Taguchi method, International Conference on Futuristic Trends in Mechanical Engineering (ICOFTIME-2020), PRESIDENCY UNIVERSITY, Bengaluru.
  5. Prashanth Pai M, Dr. Ramachandra C G, Dr. Srinivas T R, Rishi J P, Rangavendra M J, Factors Influencing the Non-Implementation of TPM in the Selected Manufacturing Industries – A Statistical Approach, International Conference on Futuristic Trends in Mechanical Engineering (ICOFTIME-2020), PRESIDENCY UNIVERSITY, Bengaluru.
  6. Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Dr. Ashok B C, Lean Implementation and Assessment within Four Indian SME’s-A Case Studies Approach, International Conference on Futuristic Trends in Mechanical Engineering (ICOFTIME-2020), PRESIDENCY UNIVERSITY, Bengaluru.

 

Journals

  1. Raghavendra M J, Dr. Ramachandra C G, T R Srinivas & Prashanth Pai M, Influence of Machining cutting speed on cutting force, Tool flank wear on PVD inserts by Turning of Ti-6Al-4V alloy, AIP Conference Proceedings 22204, 040024-1–040024-9; https://doi.org/10.1063/1.5141597, AIP Publishing-January 2020
  2. Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Abhishek, Lean Manufacturing to Green Manufacturing: Practices and its Implementation in SME’s Applied Mechanics and Materials ISSN: 1662-7482, Vol. 895, pp 21-25 doi:10.4028/www.scientific.net/AMM.895.21 © 2019 Trans Tech Publications Ltd, Switzerland
  3. Manjunatha B, Dr. T.R Srinivas and Dr. Ramachandra C G, “Reduction of CO2 emission in a Hotel Industry by using Total Productive Maintenance (TPM) Tools”, AIP Conference Proceedings 2080, 060001 (2019); https://doi.org/10.1063/1.5092936.
  4. Dayakar G. Devaru, Bhaskaran Gopalakrishnan, “Regression Model to Estimate Electrical Energy Consumption of Lumber Sawing based on product, process and system parameters”, Submitted to Energy Efficiency Journal, Springer Publication, Scopus Indexed Journal in 2019, Completed corrections after 1st Review in 2020
  5. Dayakar G. Devaru, Mr. Ravishankar M.D, Dr. Rathnakar G

“Extraction of Water from Air using Silica Gel and Solar Energy”

(Submitted to International Journal of Mechanical and Production Engineering Research and Development, Transstellar Journal Publications, Scopus Indexed Journal in 2020).

  1. Raghavendra M J, Dr.Ramachandra C G, T R Srinivas & Prashanth Pai M, Optimization of surface roughness of Titanium Gr-9Alloy Turning using Taguchi method, IOP Publishing: Materials Science and Engineering.
  2. Prashanth Pai M, Dr. Ramachandra C G, Dr. Srinivas T R, Rishi J P, Rangavendra M J, Factors Influencing the Non-Implementation of TPM in the Selected Manufacturing Industries – A Statistical Approach, IOP Publishing: Materials Science and Engineering.
  3. Rishi J P, Dr. Srinivas T R, Dr. Ramachandra C G & Dr. Ashok B C, Lean Implementation and Assessment within Four Indian SME’s-A Case Studies Approach, IOP Publishing: Materials Science and Engineering.
  4. Arunkumar, Dr. V. Ramesh and Skanda M.G., ‘Implementation of Rapid Upper Limb Assessment Technique in Automotive Parts Manufacturing Industry’ , International Journal of Recent Technology and Engineering. ISSN: 2277-3878, Volume-8, Issue-3, September 2019
  5. Dayakar G. Devaru, Ramakrishna Maddula, and Bhaskaran Gopalakrishnan,“Establishing and Comparing Electrical Energy Consumption of Sawmills”. International Journal of Applied Management Science; 2020 Vol.12 No.1, pp.23 – 49 (Inderscience Publications, Scopus Indexed Journal) DOI: 10.1504/IJAMS.2020.105299. (https://www.inderscience.com/info/inarticle.php?artid=105299)
  6. Dayakar G. Devaru, “Evaluation and Indexing of Process Plans Based on Electrical Demand and Energy Consumption” International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME)2017 7(3), Pages 19 (Scopus Indexed Journal) DOI: 10.4018/IJMMME.2017070101 Omar Ahmed Al-Shebeeb, Sivakumar Rangaswamy, Bhaskaran Gopalakrishan, (https://www.igi-global.com/article/evaluation- and-indexing- of-process- plans-based- on- electrical-demand- and-energy- consumption/182487)
12.           Dr. Savitha M et.al “Innovative Axle Design for Multipurpose Vehicle”. Journal of Automobile Engineering, 2019. (Communicated)

13.           Raghavendra M J, Dr.Ramachandra C G, Dr. T R Srinivas & Prashanth Pai M, Experimental Analysis of Cutting Parameters on Tool Wear and Work Piece Surface Temperature in Turning of Titanium Grade-5, International Research Journal of Engineering and Technology (IRJET), ISSN: 2395-0056, Volume No.7 Issue No. 1, January-2020, Page No. 1709-1713.

14.           Prashanth Pai M, Dr. Ramachandra C G, Dr. Srinivas T R, Rishi J P,  Rangavendra M J & Anitha Kamath, A Survey Approach to Study the Influence of Finance Factor & Workforce Skills in Implementing TPM in Selected SMEs, International Journal of Production Engineering. Volume No.3 Issue No. 10, 2019; 5 (1): pp. 5–12.