Prof. Siddaramaiah obtained Ph.D., (1993) from University of Mysore, India. Worked as Post Doctoral Research Fellow under Brain Korea (BK-21) Fellowship (2007-08) at Chonbuk National University, South Korea and has research collaboration with them. He worked at University of Federal, Rio de Janeiro, Brasil, twice (2005 & 2009) for 3 months each under UNESCO-TWAS Fellowship. He visited M/s. Thermo Fisher Scientific, Karlruhe, Germany and M/s. Bosch-Rexroth new Drive & Control Academy, Würzburg, Germany, during March 2009. At present he is Professor & Head, Department of Polymer Science & Technology, SJCE, JSS S&T U Mysore. Hon. Chairman, Indian Plastic Institute, Mysore Chapter, since Nov 2017. He has authored more than 300 research articles in reputed referred journals, more than 270 conference papers, 12 book chapters, 4 review articles, one book, three monographs and is a co-inventor of 2 Indian Patents and recently applied for two more Indian patents. 24 students have successfully completed their Ph.D., degree under his supervision and he has supervised 9 master theses (M.Sc., (Engg) by research, 1-M.Phil, 1-M.Pharm and 2-MDS). He is a recipient of “Young Scientist Award-1997”, in ‘Chemical Science’ awarded by KAAS, Bangalore, and “Sir C.V. Raman Young Scientist Award – 1999” in ‘Chemical Technology’ by KSCST, Government of Karnataka, Bangalore (2002). His research team received “Best Paper Award” more than ten times. He received, “Silver Trophy Plasticon Award-2012 in the category of Best Research, Plastindia Foundation, New Delhi. Recently he is the recipient of Runner-Up of 6th National Award for Technology Innovation 2015-16 in Innovation in Polymeric Products, “Design and development of highly flexible and visibly transparent UVA radiation sensing polymer nano composite hybrids”, by Ministry of Chemicals and Fertilizers, Govt. of India, New Delhi, Jan 2016.


Email Address
sr63@jssstuniv.in
Education Qualification (All qualification including diploma)

Ph.D., M.Sc., B.Sc.,

Journals Published

306

Conferences Presented

264

Research and Development projects submitted

16

Research and Development projects Awarded

16

Training Programs attended
23
Training Programs conducted and coordinated
20
Awards

(i) Recipient of “Young Scientist Award-1997”, in ‘Chemical Science’ for the year 1997, awarded by KAAS, Bangalore, India.
(ii) Listed in Marquis (USA) Who's Who in the World (biography) in 16, 17, 18 & 20th Edition – 1998, 1999, 2000 & 2002.
(iii) “Elected Member of New York Academy of Sciences”, (Membership is honored) in 1997, New York, USA
(iv) Recipient of “Sir C.V. Raman Young Scientist Award – 1999” in ‘Chemical Technology’ by KSCST, Government of Karnataka, Bangalore (received on Feb. 2002).
(v) “Conference Excellence Award” by Sri Ram Institute for Industrial Research, New Delhi at Intl. Conf. on Plastic Waste Management & Environment, held at Delhi, March 2001.
(vi) Recipient of ‘PROJECT OF THE YEAR’ award for the project entitled “Formulation and Invitro evaluation of PVA/Chitosan blend films for drugs delivery”, at the SPP Seminar-cum-Exhibition held at Siddaganga Institute of Tech., Tumkur on 18-20 Sept. 2002, by KSCST, IISc, Bangalore.
(vii) Received the “2002 Certificate of Membership”, of the American Association for the Advancement of Science, Washington, DC, USA.
(viii) Conferred "Certificate of Commendation" for the research article entitled, "Polymer Blends for Developing Transdermal Drug Delivery Systems" at the SPP Seminar-cum-Exhibition held at Vijayanagar Engineering College, Bellary on 12-13 Sept 2003, by KSCST, IISc, Bangalore.
(ix) Conferred First Prize for the Research article entitled, "Modification of LDPE Films by cross linking with Diisocyanates for Packaging Applications", for Poster Presentation at 5th Intl. Food Convention IFCON-2003, held at CFTRI, Mysore, India, from 5 to 8th Dec 2003.
(x) Conferred Third Prize for the presentation of research article in Ferrous/non-ferrous/metal sciences/group at 60th Annual Meeting of the Institute held at Jamshedpur during 14-16th Nov 2006.
(xi) Best paper Award for the article entitled “Synthesis & characterization of diol chain extended polyurethanes, presented at Seminar on Emerging trends in liquid crystals & coordination compounds, organized by St. Philomena’s College, Mysore, 21 & 22 Aug 2009.
(xii) Best Technical Paper Presentation Award for the research article entitled, “Investigation of tribological behaviour of graphite filler filled glass fabric- bifunctional epoxy composites at elevated temperatures”, presented at Intl. Conf. & Exhibition on Total Engg., Analysis & Manf. Tech., (TEAM TECH 2009), Bangalore University, 19-21 Nov. 2009.
(xiii) ‘Best Paper Award’ for the research article entitled, “Synthesis and Characterization of Silk Fibre Reinforced CEPU Composites”, The 3rd Intl. Conf. on Multi-Functional Materials & Structures (MFMS-2010), organized by Chonbuk National University, Jeonju, South Korea, 14th-18th Sept. 2010.
(xiv) ‘Best Paper Award’ for the research article entitled, Fibre-Fibre Hybrid Composites For Aerospace Applications, The 3rd Intl. Conf. on Multi-Functional Materials & Structures (MFMS-2010), organized by Chonbuk National University, Jeonju, South Korea, 14th-18th Sept. 2010.
(xv) Recipient of Plasticon Award-2012 - “Silver Trophy Award for Best Research (Polymer Sciences, Technology & Engineering)” by Plastindia Foundation, sponsored by Gharda Chemicals Ltd., received at Le Meridian, New Delhi, on 1st Feb. 2012.
(xvi) Johnsy George, V.A. Sajeevkumar, K.V. Ramana, S.N. Sabapathy and Siddaramaiah- conferred Dr T Vasundhara Memorial Best paper award for the paper “Augmented properties of PVA hybrid nanocomposites containing cellulose nanocrystals and silver nanoparticles”, March 2013, at DFRL, Mysore.
(xvii) Recipient of ‘PROJECT OF THE YEAR’ award for the project entitled, “Investigation on Opto-electrical behaviors of conducting polymer coated lithium zirconium oxide nanostructured filler loaded polyvinyl alcohol nanocomposites for solar cell applications” at the SPP Seminar-cum-Exhibition held at Angadi Institute of Technology & Management, Belgaum on 30th & 31st Aug. 2013, by KSCST, IISc, Bangalore.
(xviii) Recipient of Runner-Up of 6th National Award for Technology Innovation 2015-16 in Innovation in Polymeric Products, "Design and Development of Highly Flexible and Visibly Transparent UVA Radiation Sensing Polymer Nanocomposite Hybrids", by Ministry of Chemicals and Fertilizers, Dept. of Chemicals & Petrochemicals, Govt. of India, New Delhi, 20th Jan 2016.
(xix) ‘Best Paper Award’ for the research article entitled, “Compatibility studies of Natural Rubber/Metakaolin with Maleated Natural Rubber”, S.T. Rohini, Joong Hee Lee and Siddaramaiah, at Twenty-Sixth Intl. Conf. on “Processing and Fabrication of Advanced Materials (PFAM-XXVI)”, held at Chonbuk National University, Jeonju, South Korea, 16 -21, October 2017.
(xx) Award for Research Publications (ARP) by the Vision Group on Science and Technology, Government of Karnataka, Bengaluru, for FY: 2016-17.
(xxi) Dr. J. S. Pruthi Memorial award for 2016 for the work entitled “Air coupled ultrasonic C-scanning technique for evaluation of breathable films for MAP of fresh produce” published in Jan-Feb 2016 issue of journal ‘Indian Food Packer’, presented by Hon’ble Janab Abdur Rezzak Mollah, Ministry in-charge, department of food processing industries and horticulture, Govt. of West Bengal, on 15Dec2017 at 73rd annual conference of AIFPA at Kolkota.

9. Post Doctoral Fellowship

(i) SERC Visiting Fellowship 1998-1999 from DST, New Delhi- research carried out at Polymer Laboratory, CLRI, Chennai, India, under the supervision of Dr. Ganga Radhakrishnan, from January to April 2000 (3 months).
(ii) Visiting Scientist, at IIT, Kharagpur, Institute fellowship: Research work carried out at RTC, under supervision of Prof. G.B.Nando, from July to October (for 3 months) 2000.
(iii) TWAS Visiting Fellowship 2005 (UNESCO-TWAS) – research work carried out at Institute of Macromolecules, University of Federal, Rio de Janeiro, Brasil, under the supervision of Dr. Bluma G Soares, from July to Sept 2005 (3 months) 1st Visit.
(iv) Post Doctoral Position under Brain Korea (BK-21) Fellowship for a period of one year (2007-08), on research topic “Fuel cell/ Nanotechnology”, with Prof. Joong Hee Lee, Chonbuk National University, South Korea.
(v) Post Doctoral Position under TWAS-UNESCO Visiting Fellowship 2005 (UNESCO-TWAS) – research work carried out at Institute of Macromolecules, University of Federal, Rio de Janeiro, Brasil, under the supervision of Dr. Bluma G Soares, from 1st June to 31st July 2008 (2 months) - 2nd Visit.
(vi) Visiting Professor and to do co-research work at BIN Fusion, Dept. of Polymer & Nano Technology Chonbuk National University, South Korea, for a period of one month from 14/7/2012 to 12/8/2012.

Instrumental in getting MOU - Between S.J. College of Engg,, Mysuru and Chonbuk National University, Jeonju, Republic of Korea, May 26th 2016.

Number of PhD students awarded so far
31
Number of PhD students pursuing
8
Research Interests

Castor oil based polyurethanes (PUs), its interpenetrating polymer networks of: Chain extended PUs and their composites; Polymer blends, Toughening mechanisms: Polymer composites/green composites/ nanocomposites; Tribological behaviors; Molecular transport behaviors; Conducting polymers and its composites: Controlled release of drugs through polymeric devices: Polymer nanocomposites.

List of Publication

1. N.P. Suryanarayana, K.S. Jagadeesh and Siddaramaiah: "Applications of Thermal Analysis Methods for Rapid Determination of Compounding Parameters in Rubber Composites", Rubber India, 41, 7 (1989) 13-18.
2. N.P.Suryanarayana, K.S.Jagadeesh and Siddaramaiah: "Thermal Properties of Nylon-6 Tyre Cords", Rubber News, 29, 1 (1989) 39.
3. N.P.Suryanarayana, K.S.Jagadeesh and Siddaramaiah: "A Study on the Vulcanization of Natural Rubber by Computer-Aided Differential Scanning Calorimetry", J. Polymer Matl., 7 (1990) 297-301.
4. K.S.Jagadeesh, Siddaramaiah and V.Kalpagam: "Differential Scanning Calorimetry Cure Studies on the Effect of Addition of Epoxy Diluents to Tetrafunctional Resins", J. Appl. Polym. Sci., 40 (1990) 1281-1288.
5. K.S.Jagadeesh and Siddaramaiah: "Effect of Catalyst on the Curing of Tetrafunctional Epoxy Resin Formulations", J. Appl. Polym. Sci., 43 (1991) 1459-1465.
6. K.S.Jagadeesh and Siddaramaiah: "Curing Kinetics of Epoxy, Formulations with Diaminodiphenyl Ether", Polym. Intl., 26 (1991) 129-132.
7. K.S.Jagadeesh and Siddaramaiah: "Characterization of Cured Epoxy Systems by Dynamo Mechanical Spectrometry and Thermogravimetry", J. Polym. Matl., 9 (1992) 179-184.
8. K.S.Jagadeesh and Siddaramaiah: "Fibre Reinforced Composites of Multifunctional Epoxy Resins", Polym. Intl., 33 (1994) 367-372.
9. Siddaramaiah and K.S.Jagadeesh: "Properties of Multi- functional Epoxy Resins cured with different Amines", J. Polym. Matl., 13 (1996) 223-231.
10. Siddaramaiah, K.S.Jagadeesh and G.Prabhakara: "Cure Kinetics of Epoxy Formulations with Diaminodiphenyl Methane", Ind. J. Engg. and Matl. Sci., 3 (1996) 114-118.
11. H.S. Bojyanaik, Siddaramaiah, and P.G. Ramappa: "Thermal Degradation of Cobalt (II) - Oxepin Complexes", Thermochimica Acta, 287 (1996) 279-286.
12. T.Jeevananda and Siddaramaiah: "Studies on Microcrystalline Cellulose Powder", Ind. J. Engg. and Matl. Sci., 4 (1997) 38-40.
13. S.Shanmukhappa, Siddaramaiah and P.G.Ramappa: "Thermoanalytical and Spectral Characterization of Cd (II) - Propantheline Bromide Complexes", Asian J. Chemistry, 9 (4) (1997) 715-721.
14. A.Ramakrishna, A.N.Srivatsa, Siddaramaiah and A.Varadarajulu: "The Effect of Thermal Treatment on the Properties of PP Films and Laminates", Packaging Tech. and Sci., 10 (1997) 83-86.
15. S. Shanmukhappa, Siddaramaiah and P.G.Ramappa: "Thermal Degradation Kinetics and Antimicrobial Studies of Ni (II) - Propantheline Bromide Complexes", Samyak J. Chem., 1 (1) (1997) 22-25.
16. Siddaramaiah, R.T. Nagaralli, A. Ramakrishna and A. Varadarajulu: "Physico-Mechanical and Optical Properties of Filled Polyethylene Films", J. Plastic Films and Sheeting, 13 (1997) 252-262.
17. Siddaramaiah, S.Roopa, U.Premakumar and A.Varadarajulu: "Sorption and Diffusion of Aldehydes and Ketones into Natural Rubber Blends", J. Appl. Polym. Sci., 67 (1998) 101- 112.
18. Siddaramaiah and S. Roopa: "Sorption and Diffusion of Alkane Penetrants into Natural Rubber Blends", J. Polym. Matl., 15 (1998) 31-37.
19. Siddaramaiah and P.Mallu: "Sorption and Diffusion of Aldehydes and Ketones through Castor Oil Based IPN's of PU/PS", J. Appl. Polym. Sci., 67, 12 (1998) 2047-2055.
20. Siddaramaiah, P. Mallu and R. Somashekar: "Characterization of Castor Oil Based IPN’s of PU/PS", J. Appl. Polym. Sci., 68 (1998) 1739-1744.
21. Siddaramaiah, V.A.Joy, A.N. Swarna Gowri, B. Leena, V.Vydehi Hemmege and S.Deepa: "Tensile Behavior of Composite Patched Cracked Metallic Structures", J. Appl. Polym. Sci., 68 (1998) 2063-2068.
22. Siddaramaiah, S.Roopa and U.Premakumar: "Sorption and Diffusion of Substituted Aromatic Penetrants into Natural Rubber Blends", Polymer, 39 (17) 1998, 3925-3931.
23. A.Varadarajulu, R.Lakshminarayana Reddy and Siddaramaiah: "Ultrasonic, Refractometric and Viscosity Studies of some Polymer Blends in Solution", J. Appl. Polym. Sci., 70 (1998) 1823-1827.
24. H.S. Bhojyanaik, Siddaramaiah, and P.G.Ramappa: "Thermogravimetric Analysis of Co(II)-Dothiepin Complexes", J. Thermal Analysis and Calorimetry, 55 (3), (1999) 841-849.
25. J.Anand, S. Palaniappan, Siddaramaiah, S.Prathima and D.N. Sathyanarayan: "Spectral, Thermal and Electrical Properties of Poly (O-and M-Toluidine) - PVC Blends Prepared by Solution Blending", Eur. Polym. J., 35 (1999) 499-507.
26. Siddaramaiah, P.Mallu and A.Varadarajulu: "Thermal degradation kinetics of castor oil based PU/PS interpenetrating polymer network", Polym. Degradation & Stability, 63 (1999) 305-309.
27. H.G.Shivakumar, G.Ramalingaraju and Siddaramaiah: “Influence of Solvents on the Crystal Habit and Properties of Paracetamol Crystals”, Ind. J. Pharma. Sci., 61 (2) (1999) 100-104.
28. Siddaramaiah, S.V.Sureesh, V.B.Atul, D.Srinivas and S.Girish: "Effect of aggressive environments on glass reinforced composite properties", J. Appl. Polym. Sci., 73 (1999) 795-799.
29. Siddaramaiah, R.T.Nagaralli, P.Ravi, K.R.Kumar and K.S.Jagadeesh: "Effect of Fillers on the Properties of LDPE Films", J. Polym. Matl., 16 (1999) 233-237.
30. Siddaramaiah, P.Mallu, H.G.Naik and T.M.Aminbhavi: "A Computer Simulation Method to Calculate Concentration Profiles in Polymeric Membranes", J. Appl. Polym. Sci., 73 (1999) 2051-2055.
31. T.Jeevananda, S.Palaniyappan and Siddaramaiah: "Spectral and Thermal Studies on Polyaniline - Epoxy Novolac Resin Composite Materials", J. Appl. Polym. Sci., 74 (1999) 3507-3512.
32. Siddaramaiah, A.Ramakrishna, Nagappa and R.Somashekar: "WAXS Studies of Thermally Treated Polypropylene Films and Laminates", J. Polymer Materials, 17 (2000) 63-68.
33. V. Annadorai, R.G. Urs, Siddaramaiah and R. Somashekhar: “Small Angle X-ray Scattering in Nylon 6 using Exponential Distribution of Phase Lengths", Polymer, 41 (15) (2000) 5689-5693.
34. T.Jeevananda, S.Palaniappan and Siddaramaiah: "Electrical, Mechanical, Thermal Properties of Polyaniline-Epoxy Novalac Composite Materials", J. Polym. Mater., 17 (2000) 313-318.
35. Muneera Begum, A.Varadarajulu and Siddaramaiah: “Estimation of Thermal Parameters of Polyamides Based on Group Additive Methods”, J. Polym. Matl., 17 (2000) 329-332.
36. P.Mallu, Siddaramaiah and R. Somashekar: "Phase Modification of Castor oil Based PU/PAN IPNs", Bull. Matl. Sci., 23 (5) (2000) 413-418.
37. E.Misra, Siddaramaiah, K.R.Kumar and P.Ravi: “Effect of Recycled on the Properties of Polyethylene Terephthalate Films”, Polymer Intl., 49 (2000) 1636-1640.
38. B.K.Kendaganna Swamy, V.Annadurai, Siddaramaiah and R.Somashekar: “Physico-mechanical, Optical and WAXS Studies of Chain Extended PU Films”, J. Macromolecular Sci., Part A Polymer Chem., A 37 (12) (2000) 1617-1625.
39. Baldevraj, V.Annadurai, Madan Raj, Siddaramaiah and R. Somashekar: “Structure-property Relationship in LDPE-Starch Immiscible Blends”, Eur. Polym. J., 37 (5), (2001) 943-948.
40. T. Jeevananda, Muneera Begum and Siddaramaiah: “Mechanical, Electrical and Thermal Studies on Polyaniline Filled IPN’s of PU/PMMA”, Eur. Polym. J., 37 (6) (2001) 1213-1218.
41. P.Ravi, S. Divakar, Siddaramaiah and R. Somashekar: “Physico-Chemical Properties of PS Polymer Prepared by Inclusion Polymerization”, J. Polym. Matl., 19 (2001) 127-134.
42. T. Jeevananda, Siddaramaiah, V. Annadurai and R. Somashekar: “Studies on SLS Doped Polyaniline and its Blends with PC”, J. Appl. Polym. Sci., 82 (2001) 383-388.
43. T. Jeevananda and Siddaramaiah: “Thermal and Morphology Studies on EVA-Polyaniline Blends”, Thermochimica Acta, 376 (2001) 51-61.
44. B.K.K. Swamy, Siddaramaiah and T.M.Aminabhavi: “Interaction of Chain Extended Polyurethanes with Chlorinated Alkanes”, Polym. News, 26 (12) (2001) 421-424.
45. T. Jeevananda, Siddaramaiah, H.Somashekarappa and R. Somashekar: “Electrical, Physico-mechanical and X-ray Studies on Ethylene-vinyl acetate copolymer- Polyaniline Blends”, J. Appl. Polym. Sci., 83 (2002) 1730-1735.
46. B.K.K.Swamy and Siddaramaiah: “Chain Extended Polyurethanes- Synthesis and Characterization”, J. Appl. Polym. Sci., 84 (2002) 359-369.
47. Baldevraj, A.Eugene Raj, K.R.Kumar and Siddaramaiah: “Moisture-sorption Characteristics of Starch/LDPE Films”, J. Appl. Polym. Sci., 84 (6) (2002) 1193-1202.
48. Muneera Begum, A.Varadarajulu and Siddaramaiah: “Estimation of Dielectric Constants of Some Polyamides Based on Group Additive Methods”, Indian J. Chem. Tech., 9 (2002) 134-136.
49. Siddaramaiah, Baldevraj, D. Nagaraj, Vijay Kumar and K. Udaya Shankar: “Effect of wax and TiO2 on the properties of LDPE films”, Ind. Packaging Tech., 35 (4) (2002) 31-38.
50. Muneera Begum, A.Varadarajulu and Siddaramaiah: “Estimation of Dielectric Constants of Some Halogenated Polymers by Group Additive Methods”, Indian J. Chem. Tech., 9 (2002) 526-528.
51. B.K.Kendaganna Swamy, Siddaramaiah and R.Somashekar: “Structure-property relationship of diol chain extended castor oil based PUs”, J. Matl. Sci., 38 (3) (2003)451-460.
52. Siddaramaiah, S.Roopa and K.H.Guruprasad: “Interaction of Crosslinked EPDM blends with Chlorinated Organic Penetrants”, J. Appl. Polym. Sci., 88 (5) (2003) 1366-1375.
53. T. Jeevananda and Siddaramaiah: “Synthesis and Characterization of Polyaniline Filled PU/PMMA IPNs”, Eur. Polym. J., 39 (3) (2003) 569-578.
54. Siddaramaiah, S.Roopa and K.H.Guruprasad: “Interaction of Crosslinked EPDM/SBR Blends with Carbonyl Penetrants”, J. Polym. Engg., 23 (1) (2003) 55-57.
55. T.Jeevananda and Siddaramaiah: “Synthesis and Characterization of EVA-Polyaniline Blends by Emulsion Polymerization Technique”, Polymer Engg. & Sci., 43 (5) (2003) 1138-1150.
56. B.K.Kendaganna Swamy and Siddaramaiah: “Sorption and Diffusion of Organic Penetrants into Diol Chain Extended PU Membranes”, J. Hazd. Matl., B 99 (2003) 177-190.
57. Baldevraj, A. Eugene Raj, P.Madan Raj and Siddaramaiah: “Modeling of Moisture Sorption Isotherms of Poly (vinyl alcohol)/Starch Films”, J. Appl. Polym. Sci., 89 (14) (2003) 3874 - 3881.
58. Siddaramaiah, H.Kumar, S.Roopa, B.K.K.Swamy and T.M.Aminbhavi: "Computer Simulation Method to Calculate Concentration Profiles in PU/PS IPN Membranes", J. Appl. Polym. Sci., 90 (1) (2003) 122-128.
59. Muneera Begum, Siddaramaiah, H.Kumar and T.M.Aminbhavi: "Molecular Transport of n-alkanes in to PU/PBMA IPN systems", J. Appl. Polym. Sci., 90 (3) (2003) 739-746.
60. Siddaramaiah, T.Jeevananda, K.S. Jagadeesh, H.Somashekarappa and R.Somashekar: “Physico-mechanical, optical, barrier and WAXS studies of filled LLDPE films”, J. Appl. Polym. Sci., 90 (11) (2003) 2938-2944.
61. B.K.K. Swamy and Siddaramaiah: “Structure-property relationship of starch filled chain extended polyurethanes”, J. Appl. Polym. Sci., 90 (11) (2003) 2945-2954.
62. Siddaramaiah, Baldevraj and R. Somashekar: “Structure-properties in polyvinyl alcohol/starch composites”, J. Appl. Polym. Sci., 91 (1) (2004) 630-635.
63. Baldev Raj, K.Udaya Sankar and Siddaramaiah: "Low density polyethylene/starch blend films for food packaging applications", Advances in Polym. Tech., 23 (1) (2004) 32-45.
64. Muneera Begum Siddaramaiah, H.Somashekarappa and R. Somashekar: "Structure-property relationship of castor oil based PU/PBMA Interpenetrating Polymer Networks," J. Elastomers and Plastics, 36 (3) (2004) 197-212.
65. T. Jeevananda, Siddaramaiah, S.Seetharamu, S.Saravanan and Lawrence D'Souza: “Synthesis and Characterization of Poly (Aniline-co-Acrylonitrile) Using Organic Benzoyl Peroxide by Inverted Emulsion Method”, Synthetic Metals, 140 (2-3) (2004) 247-260.
66. B.K. Kendaganna Swamy, Siddaramaiah, H. Somashekarappa and R. Somashekar: “Structure-property Relationship of PAni Filled Chain Extended Polyurethane”, Polymer Engg. & Sci., 44 (2004) 772-778.
67. K.Vidyalakshmi, K.N.Rashmi, T.M.Pramod Kumar and Siddaramaiah: "Studies on Formulation and Invitro Evaluation of PVA/chitosan Blend Films for Drug Delivery", J. Mac. Sci., Pure & Applied Chemistry, A 41, 10 (2004) 1115-1122.
68. Muneera Begum and Siddaramaiah: “Synthesis and Characterization of PU/PBMA Interpenetrating Polymer Networks (IPNs)”, J. Matl. Sci., 39 (14) (2004) 4615-4623.
69. H.Kumar and Siddaramaiah: “Studies on bamboosa balcooa bamboo fiber for green composites with polyurethane and polyurethane/poly methyl methacrylate semi-interpenetrating polymer network”, J. Bamboo and Rattan, 3 (3) (2004) 237.
70. H.Kumar, Siddaramaiah and S.Roopa: "Chemical and Tensile Properties of Unsaturated Polyester and Polyacrylonitrile Semi-Interpenetrating Polymer Network Coated Bamboo Fibers", J. Reinforced Plastics & Composites, 24 (2) (2005) 215-218.
71. H.Kumar and Siddaramaiah: "Study of Chemical and Tensile Properties of PU and PU/PAN Coated Bamboo Fibers", J. Reinforced Plastics & Compo., 24 (2) (2005) 209-213.
72. P.R.Chetana, Siddaramaiah and P.G.Ramappa: "TGA studies of Metoclopramide Complexes of Cobalt (II) in the Solid State", Thermochimica Acta, 425 (2005) 13-21.
73. B.K.K. Swamy, Siddaramaiah, B.Vijay Kumar Naidu, N.N.Mallikarjuna and T.M.Aminabhavi: “Molecular Transport of n-Alkanes through Diol Chain Extended Polyurethane Membranes”, J. Appl. Polym. Sci., 96 (2005) 874-882.
74. A.Varadarajulu, G.Babu Rao, L.Gangadevi, Siddaramaiah, D.Subhaprada, K.Srikant Bhat and R.Shylashree: "Mechanical Properties of Short Natural Fiber Hildegardia Populifolia Reinforced Styrenated Polyester Composites", J. Reinforced Plastics & Composites", 24 (2) (2005) 423-428.
75. Siddaramaiah, P.Mallu, S.Roopa, H.Somashekarappa and R.Somashekar: “Physico-mechanical, Optical and WAXS Studies on Castor Oil Based PU/Polyacrylate IPNs”, J. Appl. Polym. Sci., 95 (3) (2005) 764-773.
76. H.Kumar and Siddaramaiah: “Study of Chemical and Tensile Properties of PU and PU/PS Coated Bamboo Fibers", Polymer-Plastics Tech. & Engg., 44 (7) (2005) 1369-1377.
77. Muneera Begum and Siddaramaiah: "Estimation of Thermal Parameters of Halogenated Polymers Based on Group Additive Methods", J. Elastomers & Plastics, (2005), 36 (3) 259-266.
78. Baldev Raj, R.S.Jagadish, P. Srinivas and Siddaramaiah: "Crosslinking of LDPE by Diisocyanates for Superior Barrier Properties", J. Appl. Polym. Sci., 96 (4) (2005) 1193-1199.
79. P. Poomalai and Siddaramaiah: “Studies on Poly(methyl methacrylate) (PMMA) and Thermoplastic (TPU) Blends”, J. Macromol. Sci.-Pure Appl. Chem., A42 (10) (2005) 1399-1407.
80. H.Kumar, Siddaramaiah, G.N.Kumara Swamy, H.B.Ravikumar and C. Ranganathaiah: "Influence of Free Volume on the Physico-mechanical Behaviour of Polyurethane/Polyacrylonitrile Interpenetrating Polymer Networks", Polym. Intl., 54 (2005) 1401-1407.
81. H.Kumar and Siddaramaiah: “A Study of Sorption/desorption and diffusion of substituted aromatic penetrants into semi interpenetrating polymer network of polyurethane/polymethyl methacrylate”, Polymer, 46 (2005) 7140-7155.
82. M.N.Satheesh Kumar and Siddaramaiah: “Studies on Poly (Styrene-co-Butyl acrylate) Latex-reinforced Polyester Nonwoven Fabric Thermoplastic Composites”, J. Reinforced Plastics & Composites, 24 (2005), 1413 – 1423.
83. M.N.Satheesh Kumar and Siddaramaiah: “Studies on Corn Starch Filled Poly (styrene-co-butyl methacrylate) Latex based Composites Reinforced with Polyester Non Woven fabric”, J. Reinforced Plastics & Composites, 24 (2005) 1985- 1994.
84. Siddaramaiah, A.K.Bhattacharya and G.B.Nando: “Studies on Miscibility of Blends of of Poly (Ethylene Acrylic Acid) and Ethylene Vinyl Acetate by Melt Rheology”, J. Appl. Polym. Sci., 98 (5) (2005) 1947-1954.
85. Baldev Raj, K.R.Kumar and Siddaramaiah: "PVA/Starch Ecofriendly Films for Food Packaging", Trends in Carbohydrate Chemistry, 9 (2005) 75-83.
86. H.B.Ravikumar, C.Ranganathaiah, G.N.Kumara Swamy and Siddaramaiah: "Influence of Free Volume on the Mechanical Properties of Epoxy/Poly (methyl methacrylate) Blends," J. Matl. Sci., 40 (24) (2005) 6523-6527.
87. Siddaramaiah, T.M.Pramod Kumar, K.H.Divya, B.Hemavathi and D.S.Manjula: “Chitosan/HPMC Polymer Blends for Developing Transdermal Drug Delivery System”, J. Macromol. Sci.-Pure Appl. Chem., A43 (3) (2006) 601-607.
88. P.Poomalai and Siddaramaiah: “Thermal and Morphological Studies on Poly (methyl methacrylate)/ Thermoplastic Polyurethane Blends”, J. Macromol. Sci.-Pure Appl. Chem., 43 (4) (2006) 695-702.
89. H. Kumar, Siddaramaiah, R.Somashekar, S.S.Mahesh, S.Abhishek, T.N.Guru Row and Geetha S. Kini: “Structure-Property Relationship of Polyethylene Glycol based PU/PAN Semi Interpenetrating Polymer Networks”, J. Appl. Polym. Sci., 99 (1) (2006) 177-187.
90. Siddaramaiah, K.H.Guruprasad, R.T.Nagaralli, H.Somashekarappa, T.N.Guru Row and R. Somashekar: “Physico-mechanical, Optical, Barrier and WAXS Studies of Filled LDPE Films”, J. Appl. Polym. Sci., 100 (4) (2006) 2781-2789.
91. Valluru Ravi, Subhash Chandra Bose, T.M. Pramod Kumar and Siddaramaiah: “Decolourization of distillery effluent using poly vinyl chloride and cellulose acetate phthalate as adsorbents”, J. Macromol. Sci.-Pure & Appl. Chem., A43 (8) (2006) 1247-1254.
92. H.Kumar, A.Anilkumar and Siddaramaiah: “Physico-mechanical, thermal and morphological behaviour of PU/PMMA Semi Interpenetrating Polymer Networks” Polym. Degradation and Stability, 91 (2006) 1097-1104.
93. M.N.Satheesh Kumar and Siddaramaiah: "Studies on Acrylonitrile-Butadiene (NBR) Latex-Reinforced Jute Nonwoven Fabric Composites Chemical Resistance, Mechanical Properties and Water Absorption", Polymer-Plastics Technology & Engg., 45 (2006) 409-414.
94. M.N. Satheesh Kumar, Siddaramaiah, J.H.Jagannath and A.S.Bawa: “Thermal and morphological studies of acrylonitrile-butadiene (NBR) latex-reinforced jute nonwoven fabric composites”, Polymers & Polym. Comp., 14 (4) (2006) 391-402.
95. Fernando G Souza Jr, B.G.Soares, G.L.Mantovanl, A.Manjunath, H. Somashekarappa, R.Somashekar and Siddaramaiah: “Blends of styrene-butadiene-styrene triblock copolymer/ polyaniline – characterization by WAXS”, Polymer, 47 (6) (2006) 2163-2171.
96. M.N.Satheesh Kumar and Siddaramaiah: "Water absorption behavior of acrylonitrile-butadiene (NBR) latex impregnated jute nonwoven fabric composites”, J. Appl. Polym. Sci., 101 (3) (2006), 2045-2050.
97. N.M.Renukappa, R.D.Sudhakar Samuel and Siddaramaiah: "Studies of physico-mechanical and electrical properties of SBR/carbon black composites", J. Reinforced Plastics & Comp., 25 (11) (2006) 1173-1178.
98. N.D.Jawali, B.Siddeshwarappa and Siddaramaiah: “Physico-mechanical properties, machinability and morphological behaviour of short glass fiber reinforced nylon 6 composites", J. Reinforced Plastics & Comp., 25, (13) (2006) 1409-1418.
99. Bluma G. Soares, M.S.M.Almeida, M.V.Deepa Urs, G.N.Kumaraswamy, C. Ranganathaiah, Siddaramaiah, and R.S.Mauler: “Influence of curing agent and compatibilizer on the physico-mechanical properties of polypropylene/nitrile butadiene rubber blends investigated by positron annihilation lifetime technique”, J. Appl. Polym. Sci., 102 (5) (2006), 4672-4681.
100. Fernando G. Souza Jr, Bluma G. Soares, Siddaramaiah, G.M.O. Barra and M.H. Herbst: Influence of plasticizers (DOP and CNSL) on mechanical and electrical properties of SBS/polyaniline blends, Polymer, 47 (21) (2006) 7548-7553.
101. Siddaramaiah, T.M.Pramod Kumar and Valluru Ravi: “Studies on biopolymers for ophthalmic drug delivery”, J. Macromol. Sci.-Pure & Appl. Chem., A44 (2) (2007) 229-234.
102. Muneera Begum, Siddaramaiah, H.Somashekarappa and R.Somashekar: "Synthesis and characterization of polyurethane/polyvinylidene chloride interpenetrating polymer networks," J. Appl. Polym. Sci., 103 (3) (2007) p. 1375-1381.
103. B.Suresha, G.Chandramohan and Siddaramaiah, P.Sampath Kumaran and S.Seetharamu: “Three-body abrasive wear behaviour of carbon and glass fibres reinforced epoxy composites”, Materials Sci. & Engg. A., 443 (2007) 285-291.
104. B.Suresha, G.Chandramohan, N.M.Renukappa and Siddaramaiah: “Mechanical and tribological properties of glass-epoxy composite with and without graphite particulate filler”, J. Appl. Polym. Sci., 103 (4) (2007) 2472-2480.
105. N.M.Renukappa, R.D.Sudhakar Samuel and Siddaramaiah: "Influence of volume fraction, voltage and temperature on the volume resistivity and break down voltage of carbon black filled SBR composites", J. Reinforced Plastics & Composites, 26 (2007) 25-40.
106. H.Kumar, Siddaramaiah, R.Somashekar and S.S. Mahesh: “Polyethylene glycol based PU/PMMA semi-interpenetrating polymer networks - Characterization by WAXS”, Materials Sci. & Engg. A., 447 (1-2) 2007, 58-64.
107. Bluma G.Soares, M.S.M.Almeida, M.V.Deepa Urs, C.Ranganathaiah and Siddaramaiah: “Effect of composition and dynamic vulcanization on the physico-mechanical properties of PP/NBR blends”, Polymer Testing, 26 (2007) 88-94.
108. T.M.Mruthyunjaya Swamy and Siddaramaiah: “Studies on miscibility of sodium alginate/ polyethylene glycol blends”, J. Macromol. Sci.-Pure & Appl. Chem., A44 (3) (2007) 321-327.
109. H.Kumar, Siddaramaiah, R.Somashekar and S.S.Mahesh: “Physico-mechanical and WAXS studies of pu/ps semi interpenetrating polymer networks”, Eur. Polym. J., 43 (2) (2007) 611-619.
110. M.N. Satheesh Kumar and Siddaramaiah: “Sorption and diffusion of water into melamine-formaldehyde (MF) incorporated poly vinyl acetate–polyester non-woven fabric reinforced composites”, Polym. Intl., 56 (2007) 409-414.
111. T.M.Pramod Kumar, H.M.Umesh, H.G.Shivakumar. V.Ravi and Siddaramaiah: “Feasibility of polyvinyl alcohol as a transdermal drug delivery system for terbutaline sulphate” J. Macromol. Sci.-Pure & Appl. Chem., A44 (6) 2007 583-589.
112. H. Kumar and Siddaramaiah: “Migration of substituted aromatic solvents into polyurethane/ polystyrene semi-interpenetrating polymer network”, J. Appl. Polym. Sci., 104 (1) (2007) 378-390.
113. T.M.Mruthyunjaya Swamy and Siddaramaiah: “Studies on miscibility of polyacrylamide/ polyethylene glycol blends”, J. Appl. Polymer Sci., 104 (3) (2007) 2048-2053.
114. P.Poomalai, B.Rama Raj and Siddaramaiah: “Poly (methyl methacrylate) toughened by ethylene-vinyl acetate co-polymer: physico-mechanical, thermal and chemical properties”, J. Appl. Polym. Sci., 104 (5) (2007) 3145-3150.
115. H.Kumar, J.C.Radha, C.Ranganathaiah and Siddaramaiah: “Physico-mechanical and free volume behaviour of guar-gum filled polyurethane/polyacrylonitrile biodegradable composites", Eur. Polym. J., 43 (4) (2007) 1580-1587.
116. N.M.Renukappa, R.D.Sudhakar Samuel and Siddaramaiah: "Styrene butadiene rubber/Aluminium Powder Composites- Mechanical, Morphological and Electrical Properties”, J. Materials Sci.: Materials in Electronics, 18 (6) (2007) 635-645.
117. D.V.Gowda, Darshan Jamindar, H.G.Shivakumar, Siddaramaiah and Valluru Ravi: “Influence of a microporous membrane coating on theophylline drug delivery”, Asian Journal of Pharmaceutical Sciences, 2 (2) (2007) 58-67.
118. M.N.Satheesh Kumar and Siddaramaiah: “Studies on melamine-formaldehyde (MF) loaded polyvinyl acetate -polyester nonwoven fabric composites", J. Thermoplastic Composite Materials, 20 (2007) 305 - 322.
119. M.N. Satheesh Kumar, K.S. Manjula and Siddaramaiah: “Transport behavior of n-alkane penetrants into castor oil based polyurethane–polyester nonwoven fabric composites”, J. Hazd. Matl., 145 (2007) 36-44.
120. S.Roopa and Siddaramaiah: “Effect of meta kaolin filler on the physico-mechanical properties and chemical resistance of chain extended polyurethane”, J. Reinforced Plastics & Composites, 26 (7) (2007) 681-686.
121. M.N.Satheesh Kumar, K.S.Manjula and Siddaramaiah: “Castor-oil based polyurethane-polyester nonwoven fabric composites: mechanical properties, chemical resistance and water sorption behavior at different temperatures", J. Appl. Polym. Sci., 105 (6) (2007) 3153-3161.
122. P.Poomalai, B.Rama Raj and Siddaramaiah: “Thermal and mechanical properties of Poly (methyl methacrylate) and Ethylene-vinyl acetate co-polymer Blends”, J. Appl. Polym. Sci., 106(1) 2007 684-691.
123. M.N.Satheesh Kumar and Siddaramaiah: “Moisture/sorption characteristics of starch-filled poly (styrene-co-butyl acrylate) latex based composites reinforced with polyester nonwoven fabric”, AUTEX Research Journal, 7 (2), (2007) 111-118.
124. H.Kumar and Siddaramaiah: “Chemical compatibility of PU/PAN interpenetrating polymer network membrane with substituted aromatic solvents”, J. Hazd. Matl., 148 (2007) 467–476.
125. B.G. Soares, F.G. Souza Jr, A.Manjunath, H.Somashekarappa, R. Somashekar and Siddaramaiah: “Variation of long periodicity in blends of styrene butadiene, styrene copolymer/polyaniline using SAXS data”, PRAMANA J. Physics, 69 (3) (2007) 435–443.
126. M.N. Satheesh Kumar and Siddaramaiah: Thermogravimetric analysis and morphological behavior of castor oil based polyurethane-polyester nonwoven fabric composites, J. Appl. Polym. Sci., 106 (2007) 3521–3528.
127. Siddaramaiah, Fabio L Barcia, Alex S Sirqueira, Caio M Paranhos, Bluma G.Soares and R.S. Mauler: “Rheological, mechanical and morphological studies of epoxy/poly(methyl methacrylate) semi interpenetrating polymer networks”, J. Appl. Polym. Sci., 106 (2007) 3808–3815.
128. B.Suresha, G.Chandramohan, N.D.Jawali and Siddaramaiah: “Effect of short glass fiber content on three-body abrasive wear behaviour of polyurethane composites”, J. Composite Materials, 41 (22) (2007) 2701-2713.
129. K.S.Manjula and Siddaramaiah: “Transport characteristics of carboxylic acids based chain extended PU membranes with penetrants”, Polymer Engg. & Sci., 47 (12) (2007) 2057-2064.
130. N.D. Jawali, Siddaramaiah, B. Siddeshwarappa and Joong Hee Lee: "Polycarbonate/short glass fibre reinforced composites - Physico-mechanical, morphological and FEM analysis", J. Reinforced Plastics & Composites, 27 (3) (2008) 313-319.
131. Fernando G. Souza Jr, B.G.Soares, Siddaramaiah, A. Manjunath and R.Somashekar: “Blends of styrene butadiene styrene triblock copolymer/polyaniline-characterization by SAXS”, Materials Sci. & Engg., A., 476 (2008) 240-247.
132. B.Suresha, G.Chandramohan, Siddaramaiah and T.Jayaraju: “Influence of cenosphere filler additions on the three-body abrasive wear behaviour of glass fibre-reinforced epoxy composites”, Polymer Composites, 29(3) (2008) 307-312.
133. M.N.Satheesh Kumar and Siddaramaiah: “Electrical and mechanical properties of carbon black filled poly(styrene-co-butyl acrylate) latex reinforced polyester nonwoven composites", Polymers and Polymer Composites, 16 (1) (2008) 63-69.
134. Valluru Ravi, Subhash Chandra Bose, T.M.Pramod Kumar and Siddaramaiah: "Influence of natural polymer coating on novel colon targeting drug delivery system", J. Materials Sci.: Materials in Medicine, 19 (5) (2008) 2131-2136.
135. Valluru Ravi, T.M.Pramod Kumar, and Siddaramaiah: "Novel colon targeted drug delivery system using natural polymers”, Indian J. Pharmaceutical Sciences, 70 (1), (2008) 113-113.
136. H.Kumar, Siddaramaiah, R.Somashekar, S.S.Mahesh and A.Manjunath: Nanocrystallite regions of gaur gum filled PU/PAN composites before and after biodegradation using WAXS, J. Appl. Polym. Sci., 108 (5), (2008) 2762-2771.
137. B.Suresha, G.Chandramohan, Siddaramaiah, Kunigal N. Shivakumar and M. Ismail: Mechanical and three-body abrasive wear behaviour of three-dimensional glass fabric reinforced vinyl ester composite, Materials Sci. and Engg., A 480 (1-2), (2008) 573-579.
138. T. Jeevananda, Siddaramaiah, Joong-Hee Lee, O.M. Samir and R. Somashekar: “Polyaniline-multi walled carbon nanotube composites: Characterization by WAXS and TGA”, J. Appl. Polym. Sci., 109 (1) (2008) 200-210.
139. Peng Li, Siddaramaiah, Nam Hoon Kim, Seok-Bong Heo and Joong-Hee Lee: “Novel PAAm/Laponite clay nanocomposite hydrogels with improved cationic dye adsorption behavior”, Composites Part B: Engg., 39 (5) (2008) 756-763.
140. B.Suresha, G.Chandramohan, Siddaramaiah and T.Jayaraju: "Three-body abrasive wear behaviour of E-glass fabric reinforced/graphite filled epoxy composites", Polymer Composites, 29 (6) (2008) 631-637.
141. Peng Li, Siddaramaiah, Ok Kyung Park, Nam Hoon Kim, Seok-Bong Heo and Joong Hee Lee: “Swelling behavior of poly(acrylamide) nanoclay composite hydrogels”, Advanced Materials Research, 47-50 (2008) 230-233.
142. T.M.Mruthyunjaya Swamy, Siddaramaiah and Joong-Hee Lee: “Miscibility behaviour of polyethylene oxide/hydroxypropyl methyl cellulose blends”, Advanced Materials Research, 47-50 (2008) pp 234-237.
143. B. Shivamurthy, Tapas Kr. Basak, M.S. Prabhuswamy, Siddaramaiah, Himanshu Tripathi and S.S. Deopa: “Influence of quartz fillers in dielectric composites on electrostrictive sensors”, Sensors & Transducers J., 92 (5) (2008) pp. 32-42.
144. P.Poomalai, T.O.Varghese and Siddaramaiah: “Investigation on thermoplastic co-poly(ether-ester) elastomer toughened poly(methyl methacrylate) blends”, J. Appl. Polym. Sci., 109 (6), (2008) 3511-3518.
145. Siddaramaiah, T.M. Mruthyunjaya Swamy, B. Ramaraj and Joong Hee Lee: “Sodium alginate and its blends with starch: Thermal and morphological properties”, J. Appl. Polym. Sci., 109 (6) (2008) 4075-4081.
146. T. Jeevananda, Joong-Hee Lee and Siddaramaiah: “Preparation of polyaniline nanostructures using sodium dodecylsulphate”, Materials Letters, 62 (24) (2008) 3995–3998.
147. P.Poomalai, Siddaramaiah, B.Suresha and Joong Hee Lee: “Mechanical and three-body abrasive wear behaviour of PMMA/TPU blends”, Materials Science and Engineering A, 492 (1-2), (2008), 486-490.
148. H.Kumar, C.Ranganathaiah and Siddaramaiah: “Correlation between physico-mechanical and free volume properties of gaur gum filled polyurethane/poly methyl methacrylate biodegradable composites”, J. Comp. Matls., 42 (17) (2008) 1787-1800.
149. B. Shivamurthy, Siddaramaiah, M.S. Prabhuswamy, B.S. Shailesh, T.K. Basak and N.A. Jnanesh: “Influence of moisture absorption and content of graphite filler on electrical property of sensors and transducers enclosures and phenomena of electrostriction in glass- epoxy composites”, Sensors & Transducers J., 97 (10) (2008) 80-90.
150. T. Jeevananda, Siddaramaiah, Nam Hoon Kim, Seok-Bong Heo and Joong Hee Lee: “Synthesis and characterization of polyaniline-multiwalled carbon nanotube nano-composites in the presence of sodium dodecyl sulfate”, Polymers for Advanced Technologies, 19, (2008) 1754–1762.
151. B.Suresha, G.Chandramohan, N.M.Renukappa and Siddaramaiah: “Influence of silicon carbide filler on mechanical and dielectrical properties of glass fabric reinforced epoxy composites”, J. Appl. Polym. Sci., 111 (2) (2009), 685-691.
152. M.N.Satheesh Kumar and Siddaramaiah: “Thermogravimetric analysis and morphological behavior of melamine-formaldehyde (MF) filled polyvinyl acetate- polyester nonwoven fabric composites”, J. Appl. Polym. Sci., 111 (3) (2009) 1165-1171.
153. Peng Li, Siddaramaiah, Nam Hoon Kim, Gye-Hyoung Yoo and Joong Hee Lee: “Poly(Acrylamide/Laponite) nanocomposite hydrogels: swelling and cationic dye adsorption properties”, J. Appl. Polym. Sci., 111 (4) (2009) 1786-1798.
154. Qi Li, Siddaramaiah, Nam Hoon Kim, Gye-Hyoung Yoo and Joong Hee Lee: “Positive temperature coefficient characteristic of graphite nanofibers reinforced high-density polyethylene/carbon black nanocomposites”, Composites Part B: Engg., 40 (3), 2009, 218-224.
155. T.M. Mruthyunjaya Swamy, B. Ramaraj and Siddaramaiah: “Thermal and morphological properties of SA/HPMC blends”, J. Appl. Polym. Sci., 112 (4) (2009) 2235-2240.
156. M.N.Satheesh Kumar, Siddaramaiah, T.M.Kotresh, R.Indu Shekar and J.H. Jagannath: "Effect of flame retardant on the combustion behavior of PVAc–MF-polyester nonwoven fabric composites", J. Reinforced Plastics & Comp., 28 (5) (2009) 537-550.
157. N.M. Renukappa, Siddaramaiah, R.D. Sudhaker Samuel, J.Sundara Rajan and Joong Hee Lee: "Dielectric properties of carbon black - SBR composites", J. Matls. Sci.: Matls. in Electronics, 20 (2009):648–656.
158. Peng Li, Nam Hoon Kim, Siddaramaiah, and Joong Hee Lee: “Swelling behavior of polyacrylamide/laponite clay nanocomposite hydrogels: pH-sensitive property”, Composites Part B: Engg., 40 (2009) 275–283.
159. T.Jeevananda, Yun Ki Jang, Joong Hee Lee, Siddaramaiah, M.V. Deepa Urs and C.Ranganathaiah: “Investigation of multi-walled carbon nanotube reinforced high density polyethylene/carbon black nanocomposites using electrical, DSC and Positron Lifetime Spectroscopy techniques”, Polym. Intl., 58 (2009) 775–780.
160. D.V. Gowda, Valluru Ravi, H.G. Shivakumar and Siddaramaiah: “Preparation, evaluation and bioavailability studies of indomethacin-bees wax microspheres”, J. Mater. Sci: Mater. Med., 20 (2009)1447–1456.
161. K. Raghava Reddy, A.V. Raghu, Han Mo Jeong and Siddaramaiah: “Synthesis and characterization of pyridine-based polyurethanes”, Designed Monomers and Polymers, 12 (2) (2009) 109-118.
162. P.Poomalai, T.O.Varghese and Siddaramaiah: “Ethylene methacrylate (EMA) Co-Polymer Toughened Polymethyl Methacrylate Blends: Physico-mechanical, Optical, Thermal and Chemical Properties”, Polymer-Plastics Tech. and Engg., 48 (9) (2009) 958-965.
163. M.N. Satheesh Kumar, Z. Yaakob and Siddaramaiah: “Poly(styrene-co-butyl acrylate) latex-reinforced polyester nonwoven fabric composites: thermal and morphological studies”, J. Appl. Polym. Sci., 114 (1) (2009) 467-474.
164. B.Suresha, Siddaramaiah, Kishore, S. Seetharamu and P. Sampath Kumaran: “Investigations on the influence of graphite filler on dry slide wear and abrasive wear behaviour of carbon fabric reinforced epoxy composites”, Wear, 267, (9-10), 2009, 1405-1414.
165. M.N.Satheesh Kumar and Siddaramaiah: “Mechanical and electrical properties of polyaniline incorporated polyvinyl acetate-polyester nonwoven fabric composites”, J. Reinforced Plastics & Composites, 28 (18) (2009) 2287-2295.
166. Murtuza Ali Syed, Siddaramaiah, B.Suresha and Akheel Ahmed Syed, “Mechanical and abrasive wear behavior of coleus spent filled unsaturated polyester/polymethyl methacrylate semi interpenetrating polymer network composites”, J. Comp. Mater., 43 (2009) pp. 2387- 2400.
167. N.Rajesh and Siddaramaiah: “Feasibility of xanthan gum–sodium alginate as a transdermal drug delivery system for domperidone”, J. Mater. Sci: Mater. Med., 20 (2009) 2085–2089.
168. B. Shivamurthy, Siddaramaiah and M.S. Prabhuswamy; “Influence of SiO2 fillers on sliding wear resistance and mechanical properties of compression moulded glass epoxy composites”, J. Minerals and Matls. Characterization and Engg., 8, (7) 2009.
169. N.M. Renukappa, R.D. Sudhaker Samuel, B. Suresha, Siddaramaiah and J. Sundara Rajan: “Mechanical and electrical properties of conducting carbon black filled SBR composites”, Intl. J. Material Research, Electronics and Electrical System, 2 (1-2), 2009, 39-51.
170. C.N.Somashekhara, K.Gowthamarajan, D.V.Gowda, N.Rajesh and Siddaramaiah: “Formulation and evaluation of ketoprofen loaded transdermal drug delivery”, Intl. J. Pharm Res., 1(4) (2009) 40-47.
171. K.S. Manjula and Siddaramaiah: Studies on the effect of maleic acid as chain extender on the properties of castor oil based polyurethanes”, Intl. J. Manufacturing Sci. & Engg., 1 (1) (2010) 7-15.
172. M.K. Manjula, K.M. Lokanatha Rai, J.M. Raj, K.S. Manjula, Siddaramaiah and C. Ranganathaiah: “Microwave assisted improvement in physico-mechanical properties of poly(vinyl alcohol)/poly (ethylene imine)/gelatin blends”, J. Polymer Research, 17(1) (2010) 89-98.
173. B.V. Suresh Kumar, Siddaramaiah, M.B. Shayan, K.S. Manjula, C. Ranganathaiah, G.V. Narasimha Rao, B. Basavalingu and K. Byrappa: “Effect of zeolite particulate filler on the properties of polyurethane composites", J. Polymer Research, 17 (1) (2010) 135-142.
174. Qi Li, Siddaramaiah, Nam Hoon Kim, Seok-Bong Heo and Joong Hee Lee: "Synergy effect of hybrid fillers on the positive temperature coefficient behavior of polypropylene/ultra-high molecular weight polyethylene composites" J. Appl. Polym. Sci., 116 (1) (2010) 116–124.
175. Siddaramaiah, Fernando G. Souza Jr, Bluma G. Soares, P. Parameswara and R. Somashekar; “Microstructural behaviours of polyaniline/CB composites by SAXS”, J. Appl. Polym. Sci., 116 (2) (2010), 673-679.
176. K.S. Manjula, M.N. Satheesh Kumar, Z.Yaakob and Siddaramaiah: “Molecular Transport Behaviour of Substituted Aromatic Solvents through Biobased Chain Extended Polyurethane”, J. Macromol. Sci.-Pure & Appl. Chem., A47 (2) (2010) 99-105.
177. Murtuza Ali Syed, Siddaramaiah, Raihan Taqui Syed and Akheel Ahmed Syed: “Investigation on physico-mechanical properties, water, thermal and chemical ageing of unsaturated polyester/turmeric spent composites”, Polymer-Plastics Tech. & Engg., 49 (2010) 555-559.
178. K.S.Manjula, M.N.Satheesh Kumar, Bluma G. Soares, Paulo Picciani and Siddaramaiah: “Biobased chain extended polyurethane and its composites with silk fibre”, Polym. Engg. & Sci., 50 (4), (2010) pp. 851-856.
179. E.Basavaraj and Siddaramaiah: “Sliding wear behaviour of nanoclay filled polypropylene/ultrahigh molecular weight polyethylene/carbon short fiber nanocomposites”, J. Macromol. Sci.-Pure & Appl. Chem., A47 (6) (2010) 558 – 563.
180. Roopa. S and Siddaramaiah: “Mechanical, thermal and morphological behaviors of castor oil based PU/PS interpenetrating polymer network-metakaolin composites”, J. Macromol. Sci.-Pure & Appl. Chem., A47 (7) (2010) 689 – 696.
181. R.Indu Shekar, T.M.Kotresh, A.S.Krishna Prasad, P.M.Damodhara Rao, M.N. Satheesh Kumar and Siddaramaiah: “Hybrid fibre fabric composites from polyetheretherketone and glass fibre”, J. Appl. Polym. Sci., 117 (3), 2010, 1446-1459.
182. Abdullah M.A.Mohamad Altaweel, C.Ranganathaiah and Siddaramaiah: “Positron lifetime spectroscopy and differential scanning calorimetric study of polystyrene based composites with fly ash, cenospheres and calcium aluminosilicate as fillers”, J. Appl. Polym. Sci., 116 (5) (2010), 3087-3094.
183. Shahryar Pashaei, Siddaramaiah and Akheel Ahmed Syed; "Thermal degradation kinetics of polyurethane/organically modified montmorillonite clay nanocomposites by TGA, J. Macromol. Sci.-Part A: Pure and Applied Chem., A47 (8), (2010) 777-783.
184. N.Mohan, S.Natarajan, S.P.Kumaresh Babu and Siddaramaiah: "Investigation on two-body abrasive wear behavior of silicon carbide filled glass fabric-epoxy composites", J. Minerals & Materials Characterization & Engg., 9(3), (2010) 231-246.
185. K.S. Manjula and Siddaramaiah: “Sorption and diffusion behaviours of substituted aromatic organic penetrants into carboxylic acids based chain extended polyurethanes membrane", J. Chemical & Engg. Data, 55 (6), (2010) 2271-2278.
186. T.M.Mruthyunjaya Swamy, B. Ramaraj and Siddaramaiah: “Sodium alginate and poly(ethylene glycol) blends: thermal and morphological behaviors”, J. Macromol. Sci.: Part A:-Pure & Appl. Chem., A47 (9) (2010) 877.
187. Rajesh, N., Siddaramaiah, D.V.Gowda and C.N.Somashekar: “Formulation and evaluation of biopolymer based transdermal drug delivery”, Intl. J. Pharma and Pharm. Sci., 2(2), (2010) 142-147.
188. P.Dinesh, N.M.Renukappa and Siddaramaiah: “Impedance and susceptance characterization of multiwalled carbon nanotubes with high density polyethylene-carbon black nanocomposites”, Integrated Ferroelectrics, 116 (2010) 128–136.
189. B.Shivamurthy, Siddaramaiah and M.S. Prabhuswamy: “Design, fabrication and testing of epoxy/ glass-reinforced pressure vessel for high-pressure gas storage”, J. Reinforced Plastics and Comp., 29 (15) (2010) 2379 – 2386.
190. Rajesh, N, Siddaramaiah, and Gowda, D.V, Formulation and evaluation of controlled release behavior of diltiazem hydrochloride from the pellets of chitosan and microcrystalline cellulose blends, Intl. J. Pharma Sci. Monitor, 1(3), 2010, 136-143.
191. D.V.Gowda, Rajesh Nayak, Afrasim Moin, H.G. Shivakumar and Siddaramaiah: “Controlled release behaviour of nifedipine from the pellets of gelucire/microcrystalline cellulose blends”, Intl. J. of Pharm. Tech. Research, 2(2), (2010) pp 1215-1226.
192. Rajesh Nayak and Siddaramaiah: “Design and evaluation of controlled release of piroxicam from the pellets of microcrystalline cellulose and hydroxy propyl methyl cellulose blends”, Intl. J. of Pharm. Tech. Research, 2(2), (2010) pp 1465-1473.
193. M.N.Satheesh Kumar, Z.Yaakob, N.Mohan and Siddaramaiah: “Mechanical and abrasive wear studies on biobased jatropha oil cake incorporated glass-epoxy composites", J. Am. Oil Chemists Society, 87 (8), (2010) pp. 929-936.
194. Gowda, D.V., Rajesh, N., Somashekhara, C.N., and Siddaramaiah: “Development and evaluation of aceclofenac loaded transdermal film”, Intl. Journal of Pharm Tech Research 2(4), (2010) pp. 2224-2233.
195. P. Dinesh, N.M. Renukappa, Siddaramaiah, J.H. Lee and T. Jeevananda: A comparative study on AC conductivity and dielectric behavior of multiwalled carbon nanotubes and polyaniline coated multiwalled carbon nanotubes filled high density polyethylene-carbon black nanocomposites, Intl. Conf. on Advanced Nanomaterials and Nanotechnology (ICANN-2009); AIP Conf. Proced., 1276 (2010) pp. 189-197.
196. Rashmi, Renukappa, N.M., and Siddaramaiah: Investigation of dielectric behaviors of nanoclay filled epoxy and PP/nylon 66 nanocomposites for cable insulation application, AIP Conf. Proceed., 1276 (2010) pp. 210-218.
197. M.N. Satheesh Kumar, Z.Yaakob, Siti Maimunah, Siddaramaiah and Abdullah, S.R.S.: "Synthesis of alkyd resin from non-edible jatropha seed oil", J. Polym. and the Environment, 18 (4) (2010) pp. 539-544.
198. Shahryar Pashaei, Siddaramaiah and Akheel Ahmed Syed: “Investigation on thermal, mechanical and morphological behaviours of organo nanoclay incorporated epoxy nanocomposites”, ARPN Journal of Eng. and Appl. Sciences, 5 (2010) 12.
199. K.S.Manjula, Siddaramaiah and Joong Hee Lee: “Synthesis and characterization of silk fibre reinforced cepu composites”, Advanced Materials Research, Vols. 123-125 (2010) pp 391-394.
200. Johnsy George, Amarinder S. Bawa and Siddaramaiah: Synthesis and characterization of bacterial cellulose nanocrystals and their PVA nanocomposites, Advanced Materials Research Vols. 123-125 (2010) pp 383-386.
201. S.P. Kumaresh Babu, Anand Chairman, N. Mohan and Siddaramaiah: Investigation on two-body abrasive wear behavior of tungsten carbide filled glass fabric- epoxy hybrid composites, Advanced Materials Research Vols. 123-125 (2010) pp 1039-1042.
202. D.V. Gowda, Rajesh, N, H.G. Shiva Kumar and Siddaramaiah: Comparative bioavailability studies of two indomethacin controlled release formulations in healthy albino sheeps, Advanced Materials Research Vols. 123-125 (2010) pp 307-310.
203. Roopa, S and Siddaramaiah: Mechanical, Thermal and Morphological Behaviors of Coconut Shell Powder Filled PU/PS Biocomposites, Advanced Materials Research Vols. 123-125 (2010) pp 331-334.
204. Siddaramaiah, K.S.Manjula and Joong Hee Lee: Structure - property relationship of castor oil based chain extended polyurethane/starch biocomposites, Advanced Materials Research Vols. 123-125 (2010) pp 371-374.
205. R. Indu Shekar, P.M Damodhara Rao, Siddaramaiah, V.C. Padaki, Nam Hoon Kim and Joong Hee Lee: Fibre-fibre hybrid composites for aerospace applications, Advanced Materials Research Vols. 123-125 (2010) pp 1231-1234.
206. E.Basavaraj, Siddaramaiah and Joong-Hee Lee: Investigations on the influence of molybdenum disulphide on tensile and dry sliding wear characteristics of nylon 66/carbon black composites, Advanced Materials Research Vols. 123-125 (2010) pp 1043-1046.
207. T. Jeevananda, O.G.Palanna, Joong Hee Lee, Siddaramaiah and C.Ranganathaiah: Electrical, thermal and positron lifetime spectroscopy studies on multi-walled carbon nanotube reinforced high density polyethylene/carbon black nanocomposites, Advanced Materials Research Vols. 123-125 (2010) pp 59-62.
208. N.Mohan, S.Natarajan, S.P. Kumaresh Babu, Siddaramaiah and Joong Hee Lee: “Solid particle erosion of UHMWPE filled aramid fabric-epoxy hybrid composites”, Advanced Materials Research, Vols. 123-125 (2010) pp 1051-1054.
209. M.N.Satheesh Kumar, Z.Yaakob and Siddaramaiah: “Acrylonitrile-butadiene latex impregnated jute nonwoven fabric-composites: biodegradation/effect of cyclic humdity/salt water”, Polymers from Renewable Resources, 1(3) 2010, 123-133.
210. Murtuza Ali Syed, Sania Akhtar, Siddaramaiah and Akheel Ahmed Syed: “Studies on the physico-mechanical, thermal and morphological behaviors of high density polyethylene/ coleus spent green composites”, J. Appl. Polym. Sci., 119 (4) (2011) pp. 1889-1895.
211. Johnsy George, K.V.Ramana, A.S.Bawa and Siddaramaiah: “Bacterial cellulose nanocrystals exhibiting high thermal stability and their polymer nanocomposites”, Intl. Journal of Biological Macromolecules, 48 (2011) 50–57.
212. R. Indu Shekar, P.M. Damodhara Rao, Siddaramaiah, M.N. Satheesh Kumar, T.M. Kotresh, R.Somashekar and P.Paramesh: “Microcrystalline and kinetic parameters of glass-peek hybrid composites”, J. Composite Mater., 45(7) (2011) 549-556.
213. N.Mohan, S.Natarajan, S.P.Kumaresh Babu and Siddaramaiah: “Investigation on sliding wear behavior and mechanical properties of jatropha oil cake filled glass-epoxy composites”, J. Am. Oil Chemists Society, 88 (1) (2011) pp. 111-117.
214. R. Indu Shekar, M.N. Satheesh Kumar, P.M. Damodhara Rao, Z. Yaakob, T.M. Kotresh, Siddaramaiah and Chandrakala, “Studies on the composites produced from co-weaved polyetheretherketone and glass fibre fabric”, J. Composite Mater., 45 (7) (2011) pp. 741- 749.
215. Siddaramaiah, M.N.Satheesh Kumar and G.B.Nando: "Rheological and mechanical properties of poly (ethylene acrylic acid) and low density polyethylene blends", J. Appl. Polym. Sci., 121 (5) (2011), 3070–3077.
216. D.V. Gowda, Rajesh Nayak, H.G. Shivakumar, Siddaramaiah and Nawaz Mahammed: “Development and evaluation of oral controlled release from aceclofenac sodium pellets”, Pharma Science Monitor, An Intl. J. Pharmaceutical Sciences, 2(2) (2011), 82-104.
217. Rajesh, N., Siddaramaiah and D.V. Gowda: “Formulation and evaluation of controlled release behaviour of diltiazem hydrochloride from the pellets of chitosan and microcrystalline cellulose blends”, Pharma Science Monitor, An International J. Pharmaceutical Sciences, 2 (2) (2011) 152-170.
218. R. Indu Shekar, T.M. Kotresh, A.S. Krishna Prasad, P.M Damodhara Rao, T. Anantha Krishnan, M.N. Satheesh Kumar and Siddaramaiah: "Hybrid fabrics for structural composites”, Journal of Industrial Textiles, 41 (1) (2011) 70-103.
219. Shahryar Pashaei, Siddaramaiah, Ali Souldozi, S. Usman Taqui Syed and Akheel Ahmed Syed: “Investigation on thermal and mechanical behaviours of crysnanoclay incorporated polyamide/nanoclay composites”, Intl. Journal of ChemTech Research, 3(3), (2011) pp 1292-1301.
220. D.V. Gowda, Rajesh, N., H.G. Shivakumar and Siddaramaiah: “Bioequivalence study of indomethacin from loaded spermaceti wax microspheres on healthy albino sheep”, Jordan Journal of Pharmaceutical Sciences, 4 (2), (2011) 124-135.
221. R. Indu Shekar, T.M. Kotresh, P.M. Damodhara Rao, M.N. Satheesh Kumar, Siddaramaiah and Md. S. Rahman: “Flammability behavior of fiber–fiber hybrid fabrics and composites” J. Appl. Polym. Sci., 122 (4) (2011) 2295-2301.
222. Shahryar Pashaei, Siddaramaiah and Akheel Ahmed Syed: “Thermal characteristics of nanostructured filler incorporated polyvinyl ester nanocomposites”, Polymer-Plastics Tech. & Engg., 50 (10) (2011) pp. 973-982.
223. Shahryar Pashaei, Siddaramaiah and Akheel Ahmed Syed: “Investigation on mechanical, thermal and morphological behaviors of turmeric spent incorporated vinyl ester green composites”, Polymer-Plastics Tech. & Engg., 50 (12) (2011), pp. 1187-1198.
224. P. Poomalai, T.O. Varghese and Siddaramaiah: "Thermo-mechanical behaviour of poly (methyl methacrylate)/co-poly (ether-ester) blends," ISRN Materials Science, Volume 2011, (2011) Article ID 921293.
225. Johnsy George and Siddaramaiah: “High performance edible nanocomposite films containing bacterial cellulose nanocrystals”, Carbohydrate Polymers, 87(3) (2012), pp. 2031-2037.
226. Siddaramaiah, Fernando G. Souza Jr, Bluma G. Soares and R.Somashekar: “Investigation on microstructural behaviour of styroflex/polyaniline blends by WAXS”, J. Appl. Polym. Sci., 124 (6) (2012), pp. 5097-5105., ISSN No: 1097-4628, Impact Factor: 1.768.
227. N. Mohan, S. Natarajan, S. P. Kumaresh Babu, Siddaramaiah and Joong Hee Lee: “Studies on erosive wear behavior of UHMWPE filled aramid-epoxy hybrid composites”, Materials and Manufacturing Processes, 27 (2012) 430–435. ISSN No: 1042-6914, Impact Factor:1.629, Citation: 4
228. Ahlam, M.A., Ravishankar, M.N., Vijayan, N., Govindaraj, G., Siddaramaiah, and A.P. Gnana Prakash, “Investigation of gamma radiation effect on chemical properties and surface morphology of some nonlinear optical (NLO) single crystals”, Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms, 278 (4-5), (2012) 26-33. ISSN No: 0168-583, Impact factor: 1.226, Citation: 2.
229. E. Basavaraj, B. Ramaraj and Siddaramaiah: "Polycarbonate/molybdenum disulphide/ carbon black composites: Physico-mechanical, thermal, wear and morphological properties", Polymer Composites, 33 (4) (2012), pp. 619-628. ISSN No: 1568-0569, Impact factor: 1.632, Citation: 3
230. Shahryar Pashaei, Siddaramaiah, Akheel Ahmed Syed, G. Ramachandra Reddy and S. Srinivasa: “The influence of crysnanoclay addition on mechanical and thermal properties of thermoplastic polyurethane elastomeric with polycarbonate nanocomposites”, Polymer-Plastics Tech. & Engg., 51 (9) (2012), 909-917. ISSN No: 1525-6111, Impact factor: 1.481, Citation: 5.
231. E.Basavaraj, B.Ramaraj and Siddaramaiah: "A study on mechanical, thermal and wear characteristics of nylon 66/molybdenum disulphide composites reinforced with glass fibres", Polymer Composites, 33(9) (2012), 1570-1577. ISSN No:1548-0569, Impact factor:1.632, Citation: 5
232. P. Poomalai, T.O. Varghese and Siddaramaiah: "Studies on thermo-mechanical characteristics of poly (methylmethacrylate) and ethylene-methacrylate copolymer blends”, Polymers & Polymer Composites, 20 (8) (2012) 665-670. ISSN No: print 0360-2559 and online: 1525-6111, Impact factor: 1.481.
233. H.N.Chandrakala, B.Ramaraj, Shivakumaraiah, G.M.Madhu and Siddaramaiah: "The influence of zinc oxide-cerium oxide nanoparticles on the structural characteristics and electrical properties of polyvinyl alcohol films", J. Matls. Sci., 47(23) (2012) 8076–8084. ISSN: 0022-2461 (Print) 1573-4803 (Online) Impact factor: 2.371, Citation: 13.
234. Johnsy George, V.A.Sajeevkumar, K.V.Ramana, S.N.Sabapathy and Siddaramaiah: “Augmented properties of PVA hybrid nanocomposites containing cellulose nanocrystals and silver nanoparticles”, J. Materials Chem., 22 (42) (2012), 22433–22439. ISSN No:22433-22439, Impact factor: 6.643, Citation: 22
235. E. Basavaraj, B.Ramaraj and Siddaramaiah: “Investigations on the influence of polytetrafluoroethylene powder as filler on physico-mechanical and wear characteristics of nylon 66/graphite composites”, High Performance Polymers, 24(7) 2012 pp. 616 - 624. ISSN No: 1862-4243, Impact factor: 1.286, Citation: 7.
236. P. Dinesh, N.M. Renukappa, Siddaramaiah and Sundara Rajan: “Electrical properties and EMI shielding characteristics of multiwalled carbon nanotubes filled carbon black-high density polyethylene nanocomposites”, Composite Interfaces, 19(2) (2012) 121-133, ISSN No: 0927-6440, Impact factor: 0.726, Citation: 3.
237. Valluru Ravi, T.M. Pramod Kumar and Siddaramaiah: “Ghatti gum based matrix tablets for oral sustained delivery of metoprolol succinate”, Intl. J. Pharmacy and Pharmaceutical Sci., Vol 4, Suppl 5, (2012) 210-216. ISSN No: 0125-4685, Impact factor: 0.154 , Citation:2.
238. Valluru Ravi, T.M. Pramod Kumar and Siddaramaiah: “Investigation of ghatti gum as a carrier to develop sustained release floating tablets of diltiazem hydrochloride”, Thai J. Pharm. Sci., 36 (2012) 155-164.
239. H.N. Chandrakala, B. Ramaraj, Shivakumaraiah, G.M. Madhu and Siddaramaiah: “Investigation on the influence of sodium zirconate nanoparticles on the structural characteristics and electrical properties of polyvinyl alcohol nanocomposite films”, J. Alloys and Compounds, 551 (2013)
531–538. ISSN No: 0925-8388, Impact factor: 2.999, Citation: 5
240. S. Rohini Thimmaiah and Siddaramaiah: “Investigation of carbon black and metakaolin co-fillers content on mechanical and thermal behaviors of natural rubber compounds”, J. Elastomers & Plastics, 45(2) (2013) 187-198. ISSN No: 0095-2443, Impact factor: 0.773, Citation: 4
241. E. Basavaraj, B.Ramaraj, Joong-Hee Lee and Siddaramaiah: “Polyamide 6/carbon black/ molybdenum disulphide composites: Friction, wear and morphological characteristics”, Materials Chemistry and Physics, 138(2–3), 2013, 658–665. ISSN No:0254-0584, Impact factor: 2.129, Citation: 7
242. K.Rukmini, B.Ramaraj, Suchetana K. Shetty, Ajay Taraiya, Sumanda Bandyopadhyay and Siddaramaiah: "Development of eco-friendly cotton fabric reinforced polypropylene composites: mechanical, thermal and morphological properties", Advances in Polymer Tech., 32(1) (2013) 21327. ISSN No: 1098-2329, Impact factor:1.096, Citation: 7.
243. H.N. Chandrakala, B.Ramaraj, Shivakumaraiah, G.M.Madhu and Siddaramaiah: “Preparation of polyvinyl alcohol – lithium zirconate nanocomposite films and analysis of transmission, absorption, emission features and electrical properties," The Journal of Physical Chemistry C, 117(9) (2013), 4777-4781. ISSN No: 1932-7447, Impact factor: 4.772, Citation: 5.
244. Rashmi, N.M.Renukappa, K.N. Shivakumar and Siddaramaiah; Effect of montmorillonite clay content on ac conductivity and impedance of Epoxy-based nanocomposites, Intl. J. Materials Research, 104 (1) (2013), pp. 84-92. ISSN 1862-5282 eISSN 2195-8556, Impact factor:1
245. M.N. Lohith, B. Ramaraj, J. Vishvajit and Siddaramaiah: "Investigation on the influence of different compatibilizers on polycarbonate/high density polyethylene blends: mechanical, thermal properties, morphology and chemical resistance", Industrial & Eng. Chemistry Research, 52(16) (2013), pp. 5672-5682. ISSN No:1520-5045, Impact factor: 2.59, Citation:1
246. S. Rohini Thimmaiah and Siddaramaiah: "Effect of brake pad waste powder incorporation on the performance of styrene–butadiene rubber vulcanizates", J. Polym. Engg., 33(3) (2013) 247–255.
247. Qi Li, Siddaramaiah, Nam Hoon Kim, David Hui and Joong Hee Lee, “Effects of dual component microcapsules of resin and curing agent on the self-healing efficiency of epoxy”, Composites: Part B, 55 (2013) 79–85. ISSN No: (online) 2191-0340, Impact factor: 2.0.
248. H.N.Chandrakala, B.Ramaraj, Shivakumaraiah, Joong-Hee Lee and Siddaramaiah: “Polyvinyl alcohol/carbon coated zinc oxide nanocomposites: Electrical, optical, structural and morphological characteristics”, J. Alloys and Compounds, 580 (2013) 392–400. Impact factor- 2.99, ISSN 0925-8388, Citation: 5
249. E. Basavaraj, B. Ramaraj, Joong-Hee Lee and Siddaramaiah: “Microstructure, thermal, physico–mechanical and tribological characteristics of molybdenum disulphide-filled polyamide 66/carbon black composites”, Polymer Engg. & Sci., 53 (8), (2013) 1676-1686, ISSN: 1548-2634, Impact factor: 1.719.
250. S. Rohini Thimmaiah, S. Roopa and Siddaramaiah: “Studies on untreated and silane treated ground granulated blast furnace slag incorporated natural rubber vulcanizates”, Ind. J. Advances in Chemical Sci., 1 (4) (2013) 213-220. ISSN No: 2320-0898.
251. P.S. Shivakumar Gouda, Krishnaraja G. Kodancha, Siddaramaiah and Dayananda Jawali: “Experimental and numerical investigations on fracture behavior of high silica glass/satin textile fiber reinforced hybrid polymer composites”, Adv. Mat. Lett., 4(11) (2013) 827-835. ISSN: 0976-3961. ISSN No: 0976-3961, Impact factor 1.9.
252. S.Rohini Thimmaiah and Siddaramaiah: “Diffusion and transport behaviors of aliphatic probe molecules through untreated and treated metakaolin filled natural rubber composites”, Appl. Polym. Comp., 1(4) (2013) 247-266. ISSN No: ISSN: (Print) 2049-6230 (Online) 2049-6249.
253. D.V.Gowda, M.Vishnu Datta, S. Aravinda Ram and Siddaramaiah: “Development and characterization of ground mixtures of aripiprazole with hydrophilic carriers”, Intl. J. Pharmaceutical Research and Bio-Sci., 2(6): (2013) 537-556. ISSN No:2277-8713, Impact factor: 1.862, Citation: 0.
254. D.V. Gowda, M.Vishnu Datta, S. Meenakshi, Siddaramaiah and N.Vishal Kumar Gupta: “Formulation and evaluation of dry powders containing anti tuberculosis drugs for pulmonary delivery”, Indo Am. J. Pharm Research, 3 (12) (2013)1239-1248. ISSN No:2231-6876, Impact factor: 0.437, Citation: 1
255. D.V. Gowda, M.Vishnu Datta, Vikas Kumar Gupta, Siddaramaiah and Atul Srivastava: “Preparation and evaluation of waxes/fat microspheres loaded with propafenone hydrochloride for controlled release”, Intl. J for Pharmaceutical Research Scholars, 2, I-4 (2013) 277-285, ISSN No: 2277-7873, Impact factor: 0.265.
256. H.N.Chandrakala, B.Ramaraj, Shivakumaraiah and Siddaramaiah: “Optical properties and structural characteristics of zinc oxide-cerium oxide doped polyvinyl alcohol films”, J. Alloys and Compounds, 586 (2014) 333-342. ISSN No: 0925-8388, Impact factor: 2.999, Citation:7.
257. H.N.Chandrakala, B.Ramaraj, Shivakumaraiah and Siddaramaiah: “Investigations on the influence of lithium potassium zirconate nanoparticles on the electrical properties and structural characteristics of polyvinyl alcohol films”, J. Physics and Chemistry of Solids, 75 (2) (2014) 252–258, ISSN-00223697, Impact Factor: 2.048.
258. M. Chethana, B.S. Madhukar, Siddaramaiah and R. Somashekar: “Structure–property relationship of biobased polyurethanes obtained from mixture of naturally occurring vegetables oils”, Advances in Polymer Tech., 33(1) 2014, 21390. ISSN No: 1098-2329, Impact factor: 1.045, Citation: 0
259. Johnsy George, R. Kumar, R. Ramalingam, V.A. Sajeevkumar, K.V.Ramana, V. Abhishek, S.N. Sabapathy and Siddaramaiah: "Hybrid HPMC nanocomposites containing bacterial cellulose nanocrystals and silver nanoparticles", Carbohydrate Polymers, 105 (2014) 285–292. ISSN No: 01448617, Impact factor: 4.074, Citation: 7
260. M. Chethana, B.Ramaraj, B.S. Madhukar and Siddaramaiah: "Investigation on the influence of nanoclay on the mechanical, thermal and morphological properties of polyurethane matrix filled with ginger spent", Advances in Polymer Tech., 33(2) (2014) 21404, ISSN No: 1098-2329, Impact factor: 1.045.
261. M. Chethana, B.S. Madhukar, R. Somashekar and Siddaramaiah: "The influence of ginger spent loading on mechanical, thermal and microstructural behaviours of polyurethane green composites", J. Composite Materials, 48 (18) (2014) 2251–2264. ISSN No: ‎0021-9983 (print); 1530-793X (online) Impact factor: 1.257, Citation: 5
262. P.S. Shivakumar Gouda, S.C. Galaveen, Siddaramaiah, and N. Dayananda Jawali: “Effect of glass/nylon coated aluminum fibers on torsional properties of epoxy polymer composite shafts”, Malaysian Polymer Journal, 9 (1), p 24-29, 2014. ISSN No:1823-7789, Impact factor: 0.027.
263. H.S. Keerthy, D.V. Gowda, R.D. Deshpande, Siddaramaiah and V. Datta: “Development of non-effervescent low density floating tablets of cefpodoxime proxetil”, Intl. J. for Pharmaceutical Research Scholars, 3(3) (2014), 69-77, ISSN No: 2277-7873, Impact factor: 0.265.
264. D.V. Gowda, R.D. Deshpande, H.S.Keerthy, V. Datta and Siddaramaiah: “Fabrication of ultrafine amorphous atorvastatin calcium nanoparticles by novel bottom-up technique”, Intl. J. for Pharmaceutical Research Scholars, 3(3) (2014) 78-85, Impact factor - 1.02.
265. Muneera Begam, M.Vishnu Datta, D.V. Gowda, A.S. Aravindaram and Siddaramaiah: “Development and characterization of co-ground mixtures and solid dispersions of aripiprazole with hydrophilic carriers”, Intl. J. Pharmacy and Pharmaceutical Sciences, 6, Suppl Issue 2, (2014) 552-557. ISSN No: 0975 - 1491, Impact factor: 0.55.
266. R. Shruthi, Siddaramaiah, R. Gayathri and R. Vasanthakumari: “Studies on nylon 6/CNT nanofiber membrane applications for heavy metal separation from industry waste water”, Ind. J. of Advances in Chemical Sci., 2 (2014) 72-75. ISSN No: 2320-0898.
267. S.K. Sindhu, D.V. Gowda, Vishnu Datta and Siddaramaiah: “Formulation and evaluation of injectable in-situ gelling matrix system for controlled drug release”, Ind. J. of Advances in Chemical Sci., 2 (2014) 89-92. ISSN 2320-0898, EISSN 2320-0928, Citation: 1.
268. D.V. Gowda, Atul Srivastava, A.S. Aravind Ram, M. Vishnudatta and Siddaramaiah: Encapsulation of lornoxicam into spermaceti microspheres and comparative bioavailability study. Intl. J. Drug Del., 2014; 6: 7 13. ISSN 0976 – 044X, Impact factor - 2.1, Citation: 1.
269. D.V. Gowda, Rohan D Deshpande, Keerthy, H.S, and Siddaramiah: Study of locust bean gum as binder of immediate release atorvastatin calcium spheroids through extrusion and spheronization techniques. Intl. J. Pharm. Sci. Res. Rev., 27 (2014) 396 – 402 ISSN 0976 – 044X, Impact factor- 2.1.
270. H.N. Chandrakala, Shivakumaraiah, H. Somashekarappa, R. Somashekar, S. Chinmayee and Siddaramaiah: “Poly(vinyl alcohol)/zincoxide-ceriumoxide nanocomposites: electrical, optical, structural and morphological characteristics”, Ind. J. of Advances in Chemical Sci., 2 (2014) 103-106. ISSN No: 2320-0898.
271. Johnsy George, R. Kumar, V.A. Sajeevkumar, S.N. Sabapathy and Siddaramaiah: “Amine functionalized nanoclay incorporated hydroxypropyl methyl cellulose nanocomposites: Synthesis and characterization”, Intl. J. Plast. Tech., 18(2) (2014) 252–262. ISSN No: 0972-656X.
272. Prasad, N., Siddaramaiah, and Banu, M.: “Effect of antioxidant tertiary butyl hydroquinone on the thermal and oxidative stability of sesame oil (sesamum indicum) by ultrasonic studies”, J. Food Sci. & Tech., 52(4) (2015) 2238-2246. ISSN: 0022-1155 (Print) 0975-8402 (Online), Impact factor: 1.24.
273. M. Chethana, K. Prashantha and Siddaramaiah: Studies on thermal behavior, moisture absorption, and biodegradability of ginger spent incorporated polyurethane green composites, J. Appl. Polym. Sci., 132(10) (2015) 41614. ISSN: 1097-4628, Impact factor: 1.6, Citation: 1.
274. Sindhu, S.K., Siddaramaiah, D. Vishakante Gowda, , Datta, V.M., A. Srivastava: “Formulation and evaluation of pH sensitive poly(acrylic acid-co-hydroxy ethyl methacrylate) hydrogels for specific site drug delivery”, Der Pharma Chemica, 7(1) (2015) 35-45. ISSN: 0378-5173, Impact factor: 3.994.
275. D.V.Gowda, Atul Srivastava, Siddaramaiah and Rudra Vaghela: “Design, development and characterization of 5- Fluorouracil encapsulated porous chitosan nanoparticles: A comparative study”, Adv. Sci. Eng. Med., 7 (2015) 1- 8 (ISSN: 2164 – 6627).
276. K.S.Nithin and Siddaramaiah: “Opto-electrical characteristics of poly(vinyl alcohol)/cesium zincate nano dielectrics”, The Journal of Physical Chemistry, Part C, 119 (35) (2015) pp 20244-20255. Print Edition ISSN: 1932-7447 Web Edition ISSN: 1932-7455, Impact factor: 4.594.
277. Atul Srivastava, D.V. Gowda, Subba Rao V. Madhunapantula and Siddaramaiah: “Development and Efficacy Assessment of an Enteric Coated Porous Tablet Loaded With F4 Fimbriae for Oral Vaccination of Piglets against F4+ Enterotoxigenic Escherichia coli Infections”, Current Drug Delivery, 13(1) (2016) 121-130. ISSN: 1567-2018, Impact factor –1.5.
278. B.S. Madhukar, R. Somashekar, D.G. Bhadre Gowda, V. Annadurai and Siddaramaiah: “Phase behaviors of PU/SPI green composites using SAXS profiles”, Advances in Polym. Tech., 35 (1) (2016) 21526, ISSN: 1098-2329, Impact factor - 1.114.
279. Mujeeda Banu, N. Prasad and Siddaramaiah: “Effect of antioxidant on thermal stability of vegetable oils by using ultrasonic studies”, Intl. Food Research J., 23(2) (2016) 528-536. ISSN 22317546 (Print), ISSN 19854668 (Online).
280. Nithin, S.K, Shivanna S, Shilpa Nagaraj K, Chiranjeevi, Ranjith, Chinmayee, S and Siddaramaiah: “Poly (vinyl alcohol) decorated lithium doped stannous oxide nanocomposites as highly flexible UVA shieldants”, Chem. Sci. J., 7 (2016) 121. ISSN: 2150-3494.
281. K.S. Nithin; K.N. Shilpa, S. Sachhidananda and Siddaramaiah: "Highly flexible and visibly transparent poly(vinyl alcohol)/calcium zincate nano composite films for UVA shielding applications as assessed by novel ultraviolet photons induced fluorescence quenching", Macromolecules, 49 (7) (2016), 2791-2801. ISSN: 0024-9297 Web Edition ISSN: 1520-5835, Impact factor- 5.54.
282. N. Ramesha, Siddaramaiah and S. Akhtar: “Abrasive water jet machining behavior of banyan tree saw dust powder loaded polypropylene green composites”, Polym. Comp., 37(6) (2016) 1754 – 1764.
283. Suma G.R., Nithin K.S., Latha B.V., Shilpa, K.N., S. Sachhidananda, S.V. Sathyanarayana and Siddaramaiah, “Refractive index engineering of strontium doped zirconium oxide (SZO) reinforced poly vinyl pyrrolidone composite films: Effect of dopant content and annealing temperature”, Intl. Journal of Eng. Sci. and Computing, 6 (5) (2016) 5703-5709.
284. Mujeeda Banu, Siddaramaiah and N. Prasad: “Radical Scavenging Activity of Tertiary Butyl Hydroquinone and Assessment of Stability of Palm Oil (Elaeis guineensis) by Ultrasonic Studies”, Chem. Biochem. Eng. Q., 30 (4) (2016) 477–487.
285. K.S.Nithin, K.N.Shilpa, S. Sachhidananda and Siddaramaiah: Visibly transparent PVA/sodium doped dysprosia (Na2Dy2O4) nano composite films with high refractive index: An optical study, J. Alloys and Compounds, 694 (2017) 884-891.
286. B. Mahesh, G.S. Nanjundaswamy, D. Channe Gowda and Siddaramaiah: "Investigation on miscibility behaviors of elastin like polypentapeptide blends with polyvinyl alcohol in aqueous and solid state", J. Appl. Polym. Sci., 134 (12) 2017.
287. N. Ramesha, Siddaramaiah and S. Akhtar: “Effect of banyan tree saw dust powder content on the mechanical properties and machining parameters on the machining behaviour of polypropylene composites”, Intl. J. Machining and Machinability of Materials,19 (2), 2017, 160-179.
288. B.S. Madhukar, D.G. Bhadregowda, R. Somashekar and Siddaramaiah: “Evaluation of mechanical, thermal and morphological behaviors of polyurethane/mahua seed cake green composite”, Advances in Polym. Tech., 36(2) (2017) 186-195 (Impact factor- 1.114, ISSN: 1098-2329).
289. Suma G.R.; Nithin Kundachira Subramani; Sachhidananda Shivanna; S.V.Satyanarayana and Siddaramaiah: "Optical and electrical evaluation of Ag0.5Cu0.75O Introduced Poly (vinyl alcohol) Based E.Coli Sensors", Journal of Mater. Sci.: Materials in Electronics, 28 (2017) 13139–13148.
290. Murad Q.A. Al-Gunaid, Adel M.N Saeed, K.S. Nithin, B.S. Madhukar and Siddaramaiah: "Optical parameters, electrical permittivity and I-V characteristics of PVA/Cs2CuO2 nanocomposite films for opto-electronic applications", J. Mater. Sci.: Materials in Electronics, 28 (11) 2017, pp 8074–8086.
291. G. Santhosh, G. P. Nayaka, Johnston Aranha and Siddaramaiah: “Investigation on Electrical and Dielectric Behaviour of Halloysite Nanotube Incorporated Polycarbonate Nanocomposite Films”, Trans Indian Inst. Met., 70(3) (2017), 549-555.
292. Suma G.R., K.S. Nithin, Shilpa K.N., S. Sachhidananda, S.V.Satyanarayana and Siddaramaiah: "Effect of Ce0.5Zr0.5O2 Nano Fillers on Structural and Optical Behaviors of Poly (vinyl alcohol)", Journal of Mater. Sci.: Materials in Electronics, 28(14) (2017), pp 10707–10714.
293. G.R. Suma, Nithin Kundachira Subramani, S. Sachhidananda, S.V. Satyanarayana and Siddaramaiah: “Nanotechnology enabled E.Coli sensors: An opto-electronic study”, Materials Today: Proceedings, 4(10) (2017), 11300–11304.
294. G. Santhosh, G.P.Nayaka, B.S. Madhukar, and Siddaramaiah: “Optical properties of PVP/Li3GaO3 nanocomposites”, Materials Today: Proceedings 4 (2017) 12061–12069.
295. P. S. Shivakumar Gouda, Vijay Chatterjee, Siddaramaiah, P.K. Barhai, and G.B. Veeresh Kumar: “Fracture toughness of glass epoxy laminates using carbon nano particles and ETBN rubber”, Materials Performances and Characterization, 6 (1) (2017) 488-499.
296. M. Chethana and Siddaramaiah: "Restricted equilibrium swelling of n-alkanes posed by ginger spent filled polyurethane green composites during sorption, desorption, resorption and redesorption processes", Advances in Polym. Tech., (In Press). (Impact factor - 1.114, ISSN: 1098-2329).
297. B.S. Madhukar, D.G. Bhadregowda, K.Hemalatha, R.Somashekar and Siddaramaiah: "Polyurethane/ soya protein isolate green composites: spectral, microstructural, thermal, swelling and biodegradation behaviors", Advances in Polym. Tech., (In Press). (Impact factor - 1.114, ISSN: 1098-2329).
298. H.B. Vasanth Patil, K.S. Nithin, S. Sachhidananda, Siddaramaiah, K.T. Chandrashekara and B.Y. Sathish Kumar: “Mycofabrication of bioactive silver nanoparticle: photo catalyzed synthesis and characterization to attest its augmented bio-efficacy”, Arabian Journal of Chemistry (In Press).
299. B. Mahesh, G.S. Nanjundaswamy, D. Channe Gowda and Siddaramaiah: "Synthesis of elastin-based polymer and evaluation of its intermolecular interactions with hydroxypropyl methylcellulose", J. Appl. Polym. Sci., (In Press).
300. T.Jeevananda, Siddaramaiah and Joong Hee Lee, “Fabrication of carbon black/HDPE/polyaniline functionalized multi-walled carbon nanotube composites for enhancing PTC characteristics”, Materials Today: Proceedings (In Press).
301. Nabeel Ahmed Syed, M.N. Prabhakar, Song Jung-Il and Siddaramaiah: “Influence of silane modified vinyl ester on the properties of Abaca fiber reinforced composites”, Advances in Polymer Tech., (In Press).
302. Adel M.N Saeed, Murad Q.A. Al-Gunaid, K.S. Nithin, B.S. Madhukar and Siddaramaiah: “The effect of cesium aluminate nanofiller on optical properties of poly vinyl pyrrolidone nanocomposite films”, Polymer-Plastics Technology and Engg., (In Press).
303. Murad Q.A. Al-Gunaid, Adel M.N Saeed and Siddaramaiah: “Effect of electrolyte content on electrical permittivity, thermal stability and optical dispersion of PVA/Cs2CuO2-LiClO4 nanocomposite solid polymer electrolytes”, J. Appl. Polym. Sci., (In Press).
304. Adel M.N Saeed, Murad Q.A. Al-Gunaid and Siddaramaiah: "Effect of lithium perchlorate on the opto-electrical and thermal properties of poly (vinyl pyrrolidone)/nano cesium aluminate solid polymer electrolytes", Polymer-Plastics Technology and Engg., (In Press).
305. G. Santhosh, G.P. Nayaka, B.S. Madhukar, and Siddaramaiah: "Luminescent down-shifting aluminosilicate nanocomposites: an efficient UVA shielding Material for photovoltaics”, J. Mater. Sci.: Materials in Electronics (Accepted).
306. B. Mahesh, G.S. Nanjundaswamy, D. Channe Gowda and Siddaramaiah: “Investigation of miscibility characteristics of synthetic elastin based polymer with poly(vinylpyrrolidone)”, J. Appl. Polym. Sci., (Accepted).

Subjects

Polymer Chemistry, NanoTechnology, Composites, Structure-Proeperty Relationships