Email Address
dr.trs@sjce.ac.in
Education Qualification (All qualification including diploma)

o Ph.D. in Mechanical Engineering from University of Mysore
o M-Tech in Mechanical Engineering from Indian Institute of Technology Madras
o B.E in Mechanical Engineering from S.J.C.E, Mysore, University of Mysore

Research and Development

• Worked as Visiting Professor at Calodonian College of Engineering (Affiliated to Glasgow University U.K.) at Muscat.
• Worked as Visiting Professor in the P.G. Department of Business Administration at Manasagangothri, Mysore.
• Worked as a Student Welfare Officer at Sri Jayachamarajendra College of Engineering, Mysuru from 2006 to 2009.
• Worked as a Staff Council Secretary at Sri Jayachamarajendra College of Engineering, Mysuru from 1993 to 2005.
• Worked as NSS Officer at Sri Jayachamarajendra College of Engineering, Mysuru from 1998 to 2000.
• Involved in holding the student council elections for about 17 years.
• Member of Anti Ragging Committee since its inception - for about 30 years.
• worked as Deputy Chief Superintendent, VTU valuation center SJCE, from 2004 to 2012.

Training Programs attended
• Competency based programme on “Instructional Design and Delivery Techniques” conducted by TTTI , Chennai from 20th Oct 86 to 12th Dec 1986. • ISTE sponsored Winter School on ‘Training of Trainers in Induction Training for New Teachers’ at SJCE from 16th Sept 1991 to 28th Sept 1991. • ISTE sponsored Summer School on ‘Maintenance Engineering’ at SJCE from July 01-14 ,1992. • ISTE sponsored Summer School on ‘Futures Tecnology and Policy Formulation’ at PESCE, Mandya from Aug 10th 1992 to Aug 22nd 1992. • ISTE sponsored Summer School on ‘Maintenance Engineering’ at SJCE from June 17th -30th 1994. • ISTE Winter School on ‘Measurement, Analysis and Control of Vibration and Noise’ held at SJCE from Sept 18-30 ,1995. • ISTE sponsored Winter School on ‘Advances in Surface Treatment Techniques’ at MCE, Hassan from 11-03-1996 to 23-03-1996. • AICTE sponsored Short Term Course on ‘Safety in Metallurgical Industries’ at Nanded, Maharashtra from 17th to 23rd June 1996. • Winter School Programme sponsored by AICTE on ‘Industry Institute Partnership’ at SJCE from Dec 30,1996 to Jan 4 ,1997. • AICTE-ISTE Programme on ‘Performance Appraisal and Development System’ at SJCE from Feb 17,1997 to Feb 22,1997. • AICTE-ISTE Programme on ‘Institutional Planning and Management’ at SJCE from Mar 17,1997 to Mar 22,1997. • Staff Development Programme sponsored by AICTE at the Dept. of Studies in Management Science Manasagangotri , Mysore from 23-4-1997 to 13-5-1997. • AICTE sponsored Training Programme on ‘Operation and Maintenance of Industrial Instrumentation Systems’ at SJCE from Sept 14-26 1998. • ISTE sponsored training programme on ‘Faculty Induction Training’ at SJCE from Feb 15-17 ,1999. • AICTE – ISTE sponsored Training Programme on ‘ Recent Developments in Automotive Vehicle Design’ at PESCE , Mandya from 20-09-1999 to 01-10-1999. • Participated in a Six Day Work Shop on " Pedagogy Of Instructional Design and Delivery System" From 30 May 2016 to 4 June 2016 at SJCE Mysuru
Number of PhD students awarded so far
3
Number of PhD students pursuing
6
Research Interests

Manufacturing Management

Total Productive Maintenance

Management Information Systems in Manufacturing Industries.

List of Publication

a. International Journal – Papers Published
1. Dr. T.R.Srinivas and Dr. Ramesh V, “Implementation of Value Stream Mapping for the Manufacture of Machining Center in a Medium Scale Industry”, International Journal of Industrial and Systems Engineering, JISE, The official Publication of Iranian Institute of Industrial Engineering, Volume-2, Number 3, February-2008, Page No. 180-196
2. Dr. T.R.Srinivas, Dr. K.V. Sreenivasa Prasad and Dr. V .Ramesh “Study on implementation of one-piece lean line design using simulation techniques: A practical approach” Journal of Industrial Engineering International, Islamic Azad University, South Tehran Branch, Jan 2008, Vol-5, No.8, pp 20-36.
3. Dr. T.R.Srinivas and Dr. Ramesh V, “Implementation of Total Productive Manufacturing Concept with reference to Lean Manufacturing in a Process Industry in Mysore”, ICFAI Journal of Operations Management, Volume-7, Number 4, February-2008, Page No. 45-57
4. Dr. T.R.Srinivas and Dr. Ramesh V, “Study on Implementation of One Piece Lean Line Design using Simulation Techniques- A Practical Approach”, Journal of Industrial Engineering and International Volume-5, Number 8, January-2009, Page No. 30-36.
5. Dr. T.R.Srinivas and Dr. Ramesh V, “Simulation Study for Reducing the Total Cost and Cycle Time using the Techniques of Lean Manufacturing- A Case Study”, Indian Institute of Industrial Engineers (IIIE), February-2009, Page No. 14-21.
6. Dr. T.R.Srinivas and Dr. Ramesh V, “Implementation of a Lean Model for carrying out Value Stream Mapping in a Manufacturing Industry”, International Journal of Industrial Engineering and Technology ISSN 0974-3146 Volume-1, Number 1-2, 2009, , Page No. 99-118.
7. Dr. T.R.Srinivas and Dr. Ramesh V, “Implementation of Value Stream Mapping to Reduce the Waste in an Organization- A Lean Manufacturing Approach” SIMS Journal of Management, August-2010
8. Dr.T.R.Srinivas, Ramachandra.C.G, “Maintenance Management Information System Used in Maintaining the Maintenance Activities of a Board Manufacturing Industry” in International Journal of Industrial Engineering and Technology (IJIET) ISSN 0974-3146 Volume 3, Number 2 (2011), pp.163-172 © International Research Publication House-2011
9. Dr. T.R.Srinivas and Ramachandra C G, “Acceptance and Usage of Management Information System in Small Scale and Medium to Large Scale Industries”, Advances in Engineering Science and Management, ISBN: 978-1-4673-0213-5,IEEE Explorer – March 2012, Page No. 31-35.
10. Dr. T.R.Srinivas and Ramachandra C G, “Acceptance and Usage of Management Information System (MIS) in Small Scale Industries”, International Journal of Research in Commerce & Management (IJRCM) ISSN 2231-5756, Volume 2, Issue 3, March-2012, Page No. 78-82.
11. Dr. T.R.Srinivas and Ramachandra C G, “Study On Usage Of Management Information System (MIS) In Medium Scale Industries”, International Journal of Business Research and Manufacturing Management(IJBRMM),ISSN 2231-5439 Business Management Research (BMR), Volume 2, Number 1, April-2012, Page No. 21-26.
12. Dr. T.R.Srinivas and Ramachandra C G, “Comparative Study on usage of Management Information System (MIS) in Small Scale and Medium Scale Industries in India”, International Journal of Management Research and Technology (IJMRT), ISSN 0974-3502, Serials Publications, Volume 6, Number 2, July-December 2012, Page No. 165-174.
13. Dr. T.R.Srinivas and Ramachandra C G, “Management Information System (MIS) applied to Small Scale Industries”, International Journal of Business Research and Manufacturing Management (IJBRMM) ISSN 2231-5349 (Online) Business Management Research (BMR), Volume 2, Number 3, October-2012, Page No. 01-07.

14. Dr. T.R.Srinivas and Ramachandra C G, “Management information system applied to mechanical department of an engineering college”, International Journal of Research in Commerce & Management (IJRCM) ISSN 2231-5756 Volume 2, Issue 11, November-2012, Page No. 21-26.
15. Dr. T.R.Srinivas and Ramachandra C G, “Case Study on Comparison of Usage and Acceptance of Management Information System (MIS) in Medium Scale and Large Scale Organizations”, International Journal of Engineering, Science and Innovative Technology (IJESIT) ISSN: 2319-5967 Volume 1, Issue 2, November-2012, Page No. 125-134.
16. Dr. T.R.Srinivas and Ramachandra C G, “A Study on Development and Implementation of a Computerized Maintenance Management Information System for a Process Industry”, International Journal of Engineering and Innovative Technology (IJEIT)ISSN: 2277-3754 Volume 2, Issue 5, November-2012, Page No. 93-99.
17. Dr. T.R.Srinivas and Ramachandra C G, “A Study on usage of Management Information System (MIS) in Medium to Large Scale Industries”, International Journal on Recent Trends in Engineering and Technology (IJRTET), ISSN 2158-5563 (Online) ISSN 2158-5555 (Print), Association of Computer Electronics and Electrical Engineers (ACEEE), Vol. 8, No. 1 January-2013, Page No. 60-63.
18. Dr. T.R.Srinivas and Ramachandra C G, “Design, Development and Implementation of Computerized Maintenance Management Information System (CMMIS) for a Selected Medium Scale Industry”, International Journal of Science, Engineering and Technology Research (IJSETR) ISSN: 2278-7798, Volume 2, Issue 8, August-2013, Page No. 1634-1643.
19. Dr. T.R.Srinivas and Ramachandra C G, “Application Of Computerized Management Information System(CMIS) For A Paint Manufacturing Industry”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-3, Sept-2013, Page No. 01-12.
20. Dr. T.R.Srinivas and Ramachandra C G, “Optimization of Process Parameters For The Production of LH Channel Using CNC Milling”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-4, Oct-2013, Page No. 01-10.
21. Dr. T.R.Srinivas and Ramachandra C G, “GPS Based Remote Black Box for Airborne Vehicles”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-4, Oct-2013, Page No. 11-25.
22. Dr. T.R.Srinivas and Ramachandra C G, “Design and Fabrication of Automotive Hydraulic Jack System for Vehicles”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-6, Issue-4, Oct-2013, Page No. 26-39.
23. Dr. T.R.Srinivas and Rishi J P, “A Study On Implementation Of Lean Manufacturing Practices For An Automobile Industry”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-7, Issue-1, Jan-2014, Page No. 01-09.
24. Dr. T.R.Srinivas and Ramachandra C G, “A Survey Conducted to Analyze the Factors Influences the Non-Usage of Management Information System (MIS) in Selected Large Scale Industries” International Journal ELSEViER ISBN: 2978-93-5107-222-5 March-2014.
25. DR. T.R.Srinivas and Manjunatha B, “Waste Minimization Initiatives and Energy Conservation in Hotel Industries”, International Journal of Research in Science And Technology (IJRST) ISSN: 2249–0604 Volume-4, Issue-3, July-Sept 2014, Page No. 81-89.
26. Dr. T.R.Srinivas and B.C.Ashok, “Overall Equipment Effectiveness of Critical Machines in Manufacturing Industries- A Practical Analysis” International Journal of Mechanical Engineering &Technology (IJMET), September (2014) Volume 5, Issues-9 ISSN 0976-6340.
27. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Condition Monitoring Of Dump Mill Of A Banbury Machine”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-1, Jan-2015, Page No. 32-39.
28. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Improvement In Productivity Of Castings By Switching From Green Sand Mould Process To Shell Mould Process”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-2, Feb-2015, Page No. 01-11
29. Dr. T.R.Srinivas and Dr. Ramachandra C G, “A Study To Verify The Possible Reasons For The Non-Usage Of Management Information System (MIS) In Selected Medium Scale Industries”, International Journal of Transformations in Business Management (IJTBM) ISSN: 2231–6868 Volume-5, Issue-1, Jan-Mar 2015, Page No. 09-17.
30. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Vibration Monitoring Of Blower In A Tyre Manufacturing Industry”, International Journal of Advances in Engineering Research (IJAER) ISSN: 2231–5152 Volume-9, Issue-3, Mar-2015, Page No. 24-35.
31. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Design Of CNC Milling Fixture For An Aluminum Aerospace Component”, International Journal of Research in Science And Technology (IJRST) ISSN: 2249–0604 Volume-5, Issue-1, Jan-Mar 2015, Page No. 57-67.

32. Dr. T.R.Srinivas and Manjunatha B, “Ecotel concept for energy conservation &waste reduction in hotel industries”, International Journal of Computer Applications (IJCA) ISBN: 973-9380892-01-1, Proceedings on NCPSIA-15, Number.01, December 2015 Page No.22-24
33. Dr. T.R.Srinivas and Dr. Ramachandra C G, “A Review on Tool Flank Wear Monitoring by Tool Condition Monitoring System using Various Approaches”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455-5703 Volume No.1 Issue No. 4, March 2016 Page No.07-13.
34. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Effect of Total Productive Maintenance (TPM) Implementation in Manufacturing and Service Industries – A Review”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.346-350.
35. Dr. T.R.Srinivas and Dr. Ramachandra C G, “A Study on Different Tool Condition Monitoring System Available to Monitor Tool Flank Wear”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.359-364.
36. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Permanent Magnet Propelled Vertical-Axis Wind Turbine”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.383-386.
37. Dr. T.R.Srinivas and Manjunatha B, “Management Information System (MIS) in Hotel Industries to Improve Overall Efficiency”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.399-405.
38. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Permanent Automatic Distance Measurement and Breaking for Automobile/AGV (Automated Guided Vehicle) Using Ultrasonic Waves and Accident Detection by GSM”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.100-103.
39. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Automated Railway Signalling and Interlocking System Design Using PLC and SCADA”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.01-05.
40. Dr. T.R.Srinivas and Neetha K, “A Study on Implementation of Total Quality Management (TQM) in Hospital to Improve Service Quality”, Proceeding of National Conference on Advances in Mechanical Engineering Science-International Journal of Emerging Trends in Technology (IJETT) ISSN: 2231-5381, May-2016 Page No.22-25.
41. Dr. T.R.Srinivas and Rishi J P, “Implementation of Lean Strategies in an Automobile Axle Plant”, International Journal of Engineering Technology, Management & Applied Sciences (IJETMAS) ISSN: 2349-4476, Volume No.4 Issue No. 8, August-2016 Page No.74-81.
42. Dr. T.R.Srinivas and Rishi J P, “Keys to Succeed in Implementing Total Preventive Maintenance (TPM) and Lean Strategies”, International Journal for Modern Trends in Science & Technology (IJMTST) ISSN: 2455-3778, Volume No.2 Issue No. 7, July-2016 Page No.25-30.
43. Dr. T.R.Srinivas and Rishi J P, “Implementation of Lean Strategies in an Automobile Axle Plant”, International Journal of Engineering Technology, Management & Applied Sciences (IJETMAS) ISSN: 2349-4476, Volume No.4 Issue No. 8, August-2016 Page No.74-81.
44. Dr. Ramachandra C G and Prashanth Pai M, “OEE - A Tool to Measure the Effectiveness of TPM Implementation in Industries - A Review”, Global Research and Development Journal for Engineering (GRDJE) ISSN: 2455-5703 Volume No.1 Issue No. 12, November 2016 Page No.92-96.
45. Dr. T.R.Srinivas and Rishi J P, “Implementation of Lean Strategies in an Automobile Axle Plant”, International Journal of Advances in Scientific Research & Engineering (IJASRE) ISSN: 5454-8006, Volume No.2 Issue No. 10, November-2016 Page No.01-07.
46. Dr. T.R.Srinivas and Prashanth Pai M, “Optimal Inspection Frequency of a Critical Machine in a Machine Tool Manufacturing Unit”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.179-182.
47. Dr. T.R.Srinivas and Raghavenra M J, “Determination of Flak Wear of a PVD Coated Carbide Tool by Condition Monitoring”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.108-113.
48. Dr. T.R.Srinivas and Rishi J P, “Development of Framework for Lean Manufacturing Implementation in SMEs”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.243-248.
49. Dr. T.R.Srinivas and Prashanth Pai M, “Total Productive Maintenance – A Performance Enhancement Strategy for Manufacturing Industries”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.305-311.
50. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Vibration Monitoring of Thread Line Mill in a Tyre Manufacturing Industry”, Journal of Engineering Technological Research (JETR) ISSN: 2229-9262, Volume No.8, March 2017 Page No.174-178.

b. National Journal - Papers Published
1. Dr. T.R.Srinivas, V. Ramesh and Dr. K.V. Sreenivasa Prasad, “Simulation Study for reducing the Total Cost and Cycle time using the Techniques of Lean Manufacturing- A Case Study”, Indian Institute of Industrial Engineers (IIIE) during June 2008
2. Dr. T.R.Srinivas and Ashok B.C, “A Healthy Maintenance by TPM of an Organization- A Case Study”, M-Infiniti Journal of Management India, 2009.
3. Dr. T.R.Srinivas, V. Ramesh and Dr. K.V.Sreenivasa Prasad, “Implementation of Total Productive manufacturing concept with reference to Lean Manufacturing in a Processing Industry in Mysore” ICFAI Journal of operations management, 2009
4. Dr. T.R.Srinivas and Ashok B.C, “Indentifying Key Equipments and Selective Implementation of TPM for better Productivity and Quality”, M-Infiniti Journal of Management India, 2010
5. Dr. T.R.Srinivas and Ramachandra C G, “Maintenance Management Information System applied to a Process Industry”, Journal of Advances in Mechanical Engineering NAME-10, ISBN 978-81-8424-623-0 pp.480-485 Allied Publishers Pvt. Ltd. New Delhi-2010.
6. Dr. T.R.Srinivas and Ramachandra C G, “Computer Aided Maintenance Management Information System for A Tyre Manufacturing Industry”, ICAMT during June 2012.
7. Dr. T.R.Srinivas and Ramachandra C G, “Comparative Study on usage of Management Information System (MIS) in Small Scale and Medium Scale Industries in India”, ISBN 978-93-5051-905-9, during July 2012.
8. Dr. T.R.Srinivas and Ramachandra C G, “A Study to Find Out the Influencing Factors for Non-Usage of Management Information System in Selected Small Scale Industries”, Indian Journal of Mechanical Engineering and Research (IJMER) ISSN: 2223-5329, Vol-1, No-1, Aug-2013.

c. International Conference - Papers Presented
1. Dr. T.R.Srinivas, V. Ramesh and Dr. K.V.Sreenivasa Prasad, “Kanban, 5 S housekeeping and value stream mapping in a manufacturing industry” International Conference – CPIE 2007, NITJ, Jalandar, during 22-24th March 2007.
2. Dr.T.R.Srinivas M.S.Shashikala, Dr.B.S.V Bhargav “Six Sigma System as applied to Technical Education” 17th International conference on Flexible Automation and intelligent manufacturing (FAIM 2007) Philadelphia, USA, during 17th to 21st June 2007.
3. Dr.T.R.Srinivas, M.S.Shashikala, Dr.B.S.V Bhargav, “The New Quality Model of “Knowledge management and human relations”addressing TQM objectives in manaufacturing industries” 17th International conference on Flexible Automation and intelligent manufacturing (FAIM) Philadelphia, USA, during 17th to 21st June 2007
4. Dr.T.R.Srinivas, M.S.Shashikala, Dr.B.S.V.Bhargav “ Total quality management a Myth or reality in Indian corporate management Scenario” International Conference conducted by ‘International Academy of Management & Business ( IAMB) 2008 at San Diego, USA, during Jan 28th – 30th ¬ 2008.
5. Dr.T.R.Srinivas, M.S.Shashikala, Dr.K.L.Puttabuddhi, Dr.B.S.VBhargav, “The application of Total Quality Management (TQM) to power sector management – sharing “NEW thoughts” International Conference conducted by ‘International Academy of Management & Business ( IAMB) 2008 at San Diego, USA, during Jan 28th – 30th ¬ 2008.
6. Dr. T.R.Srinivas, V. Ramesh and Dr. K.V.Sreenivasa Prasad, “Simulation study and implementation of single piece lean line design for cycle time reduction – A practical approach” International conference ICSTC, National University, Sandiego, USA during 31st March to 3rd April 2008. Page No. 271-283
7. Dr. T.R.Srinivas, Dr. K.V. Sreenivasa Prasad and Dr. V .Ramesh, “ An analysis for the reduction of rejection using TRIZ problem solving tool to be presented at FAIM 2010, SAN Francisco during June 12, 2010.
8. Dr. T.R.Srinivas and Ramachandra C G, “Maintenance Management Information System Used in Maintaining the Maintenance Activities of a Process Industry” International Conference on Operational Excellence for Global Competitiveness ICOEGC – 2011, R.V. College of Engineering, Bangalore, 3-5th February 2011.
9. Dr. T.R.Srinivas and Ramachandra C G, “Acceptance and Usage of Management Information System in Medium to Large Scale Industries”, International Conference on Mechanical Engineering Technology ICOMET-2012, St. Joseph’s College of Engineering & Technology. Kottayam, 20th and 21stJanuary 2012.
10. Dr. T.R.Srinivas and Ramachandra C G, “Acceptance and Usage of Management Information System in Small Scale and Medium to Large Scale Industries”, IEEE International Conference on Advances in Engineering, Science and Management IEEE-ICAESM-2012, EGS Pillay Engineering College, Nagapattinam, 30th and 31stMarch 2012.
11. Dr. T.R.Srinivas and Ramachandra C G, “Study on Usage of Management Information System (MIS) in Medium Scale Industries”, International Conference on ‘Recent Advances in Mechanical Engineering INCRAME-2012, Dr. M.G.R Educational and Research Institute University, Chennai, 19th and 20thApril 2012.
12. Dr. T.R.Srinivas and Ramachandra C G, “Computer Aided Maintenance Management Information System for A Tyre Manufacturing Industry”, International Conference on Advances in Manufacturing Technology ICAMT-2012, Chennai Institute of Technology, Chennai, 15-17thJune 2012.
13. Dr. T.R.Srinivas and Ramachandra C G, “Comparative Study on usage of Management Information System (MIS) in Small Scale and Medium Scale Industries in India”, International Conference on Current Trends in Engineering ICCTEM-2012, VidyaVardhaka College of Engineering, Mysore, 12-14thJuly 2012.
14. Dr. T.R.Srinivas and Ramachandra C G, “Management Information System (MIS) applied to Small Scale Industries”, International Conference on Application of Optimization Techniques in Engineering ICAOTE-2012, Kodaikenal, 27th and 28thSeptember2012.
15. Dr. T.R.Srinivas and Ramachandra C G, “Application of Computerized Management Information System (MIS) For A Paint Manufacturing Industry”, IEEE International Conference on Research and Development Prospects on Engineering and Technology IEEE-ICRDPET-2013, EGS Pillay Engineering College, Nagapattinam, 29th and 30thMarch 2013.
16. Dr. T.R.Srinivas and Ramachandra C G, “A Survey Conducted to Analyze the Factors Influences the Non-Usage of Management Information System (MIS) in Selected Large Scale Industries”, International Conference on Recent Trends in Engineering and Technology ELSEVIER-ICRTET-2014, SNJB's Late Sau K.B. Jain College of Engineering, Chandwad, 28th to 30th March 2014.

17. Dr. T.R.Srinivas and Rishi J P, “A Study on Implementation of Lean manufacturing Practices with Special Reference to Automobile Industry”, 2nd International Conference on Current Trends in Engineering and Management (ICCTEM-2014) organized by Vidyavardhaka College Of Engineering Mysore during 17- 19 July 2014.
18. Dr. T.R.Srinivas and B.C.Ashok, “Overall Equipment Effectiveness of Critical Machines in Manufacturing Industries- A Practical Analysis” 2ndInternational Conference on Current Trends in Engineering and Management (IITEM-2014) organized by Vidyavardhaka College Of Engineering Mysore during 17- 19 July 2014.
19. Dr. T.R.Srinivas and Prashanth Pai M, “Optimal Inspection Frequency of a Critical Machine in a Machine Tool Manufacturing Unit”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
20. Dr. T.R.Srinivas and Raghavenra M J, “Determination of Flak Wear of a PVD Coated Carbide Tool by Condition Monitoring”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
21. Dr. T.R.Srinivas and Rishi J P, “Development of Framework for Lean Manufacturing Implementation in SMEs ”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
22. Dr. T.R.Srinivas and Prashanth Pai M, “Total Productive Maintenance – A Performance Enhancement Strategy for Manufacturing Industries”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
23. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Vibration Monitoring of Thread Line Mill in a Tyre Manufacturing Industry”, International Convention on Dissemination of Innovative Research in Science, Engineering Technology & Management Applications in association with Society of Professional Engineers, Kuala Lumpur, Malaysia on 11th & 12th March 2017.
24. Dr. T.R.Srinivas and Rishi J P, “A Study on Lean Manufacturing Practice Carried Out for Axle Housing Plant”, International Conference on Research in Mechanical Engineering Sciences RiMES-2017 organized by Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal University during 21st - 23rd December 2017.
25. Dr. T.R.Srinivas and Prashanth Pai M, “Reliability Assessment and Study of Quality Control Tools on Intermixer and Dump Mill of a Tyre Manufacturing Industry”, International Conference on Research in Mechanical Engineering Sciences RiMES-2017 organized by Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal University during 21st - 23rd December 2017.
26. Dr. T.R.Srinivas and Manjunatha B, “Implementation of total productive maintenance (TPM) to increase overall equipment efficiency of an hotel industry”, International Conference on Research in Mechanical Engineering Sciences RiMES-2017 organized by Department of Mechanical and Manufacturing Engineering, Manipal Institute of Technology, Manipal University during 21st - 23rd December 2017.

d. National Conference – Papers Presented
1. Dr. T.R.Srinivas, V. Ramesh and Dr. K.V.Sreenivasa Prasad, “Lean Manufacturing Principles in a Typical Processing Organization” National Conference on Recent trends in mechanical Engineering RTME under TEQIP” organized by Department of Mech. Engg. SJCE, Mysore during 27-28 October 2006.
2. Dr. T.R.Srinivas, V. Ramesh and Dr. K.V.Sreenivasa Prasad, “Overview of Value Stream Mapping as a Tool to Lean Manufacturing in a Typical Manufacturing Industry”, National Conference on Recent trends in mechanical Engineering RTME under TEQIP”, organized by Department of Mech. Engg. SJCE, Mysore during 27-28 October 2006
3. Dr.T.R.Srinivas, Ashok.B.C, “The study of the total attentive maintenance of highly critical equipments with Pareto technique – a new model” National Seminar “Emerging Trends in Managements” 28-29th Feb 2008 at Periyar Institute of Management Studies, Salem.
4. Dr.T.R.Srinivas, Ashok.B.C, “The study of the effective use of trained dynamic critical maintenance squad for flash maintenance services as key to TQM”, International Conference “Services Marketing in the Globalized Era” 15th May 2008 at San International Business School, Walayar, Coimbatore
5. Dr.T.R.Srinivas, Ashok.B.C, ”The study of the Total Attentive Maintenance as tool for industrial progress” National Seminar “Strategies to achieve double digit growth in Indian economy – Need for a big push and holistic approach to Indian growth progress” 24 Jan 2009 at ICFAI National College, Mysore.
6. Dr. T.R.Srinivas and Ramachandra C G, “Management Information System in Maintenance an Approach”, National Seminal on Changing Frontiers of Industrial Development in India”, Srinivas Institute of Technology Mangalore, 26th and 27th April 2009.
7. Dr. T.R.Srinivas and Ramachandra C G, “Maintenance Management Information System applied to a Process Industry”, National Conference on Advances in Mechanical Engineering, NAME-2010, Jawaharlal Nehru National College of EngineeringShimoga, 24th and 25th September 2010.
8. Dr. T.R.Srinivas and Ramachandra C G, “Maintaining the Maintenance Activities by using Maintenance Management Information System”, National Conference on Advances in Mechanical Engineering AIMEngg-2011, Manipal Institute of Technology Manipal, 3rd -5th January 2011
9. Dr. T.R.Srinivas and Ramachandra C G, “Design and Development of Maintenance Management Information System”, National Seminar on Emerging Trends in Indian Service Sector, Srinivas Institute of Technology Mangalore, 26th and 27th April 2011.
10. Dr. T.R.Srinivas and Ramachandra C G, “Design and Development of Computer Aided Maintenance Management Information System for a Tyre Manufacturing Industry”, National Research Conference on Innovative Paradigms in Contemporary Management PINNACLE– 2012, S.B. Jain Institute of Technology Nagpur, 28th January 2012
11. Dr. T.R.Srinivas and Ramachandra C G, “A Study on Implementation of Maintenance Management Information System for Indian Industries”, National Seminar on Emerging Trends in Indian Service Sector, Srinivas Institute of Technology Mangalore,26th and 27thApril 2012.
12. Dr. T.R.Srinivas and Ramachandra C G, “Importance of Computerized Maintenance Management System for Small Scale Industries”, National Seminar on Business in Global Economy: Issues & Challegnes, Srinivas Institute of Technology Mangalore,26thApril 2013.
13. Dr. T.R.Srinivas and Manjunatha B, “Ecotel concept for energy conservation &waste reduction in hotel industries”, National Conference On Power Systems & Industrial Automation (NCPSIA-15) at GSSIETW, Mysuru on 22nd August 2015.
14. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Effect of Total Productive Maintenance (TPM) Implementation in Manufacturing and Service Industries – A Review”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
15. Dr. T.R.Srinivas and Dr. Ramachandra C G, “A Study on Different Tool Condition Monitoring System Available to Monitor Tool Flank Wear”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
16. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Permanent Magnet Propelled Vertical-Axis Wind Turbine”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
17. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Management Information System (MIS) in Hotel Industries to Improve Overall Efficiency”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
18. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Permanent Automatic Distance Measurement and Breaking for Automobile/AGV (Automated Guided Vehicle) Using Ultrasonic Waves and Accident Detection by GSM, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.

19. Dr. T.R.Srinivas and Dr. Ramachandra C G, “Automated Railway Signalling and Interlocking System Design Using PLC and SCADA”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016
20. Dr. T.R.Srinivas and Neetha K, “A Study on Implementation of Total Quality Management (TQM) in Hospital to Improve Service Quality”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016.
21. Dr. T.R.Srinivas and Rishi J P, “Elimination of Tack weld through Measurement of Grooving angle of axle housing to facilitate Seam welding process by lean manufacturing approach”, Two Day National Conference on Advances in Mechanical Engineering Sciences (NCAMES-2016) at SIT, Mangaluru, 6th & 7th MAY-2016

Subjects

• Mechanical Engineering Science • Engineering Graphics • Applied Mechanics • Strength of Materials • Theory of Machines • Fluid Power Systems • Basic Thermodynamics • Applied Thermodynamics • Fortran-IV • Microprocessors • Industrial Management • Human Resource Management • Total Quality Management • Statistical Quality Control • Operations Management • Operations Research • Machine Design-1 • Machine Design-II • Design and Drawing • Engineering Economics • Computer Integrated Manufacturing • Automation in Manufacturing • CAD/CAM • Just in Time • Power Plant Engineering • Machine Tool Technology • Production Technology-I • Production Technology-II • Production Technology-III • Concurrent Engineering • Machine Drawing • Supply Chain Management • Control Engineering